RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> McNairy County >> Turner Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Turner Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Turner Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Turner Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Chewalla
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for Chewalla
    • Chewalla is located in McNairy County
  • Ramer
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ramer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ramer
    • Ramer is located in McNairy County
    • Population from the 2020 Census: 293 people
    • Jump to TripAdvisor's Tourism page for Ramer <3>
  • Guys
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for Guys
    • Guys is located in McNairy County
    • Population from the 2020 Census: 430 people
  • Essary Springs
    (6 miles [9.7 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Essary Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Essary Springs
    • Essary Springs is located in Hardeman County
  • Eastview
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Eastview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eastview
    • Eastview is located in McNairy County
    • Population from the 2020 Census: 702 people
  • Falcon
    (9 miles [14.5 km] to the northeast)
    • Jump to our Gazetteer entry for Falcon
    • Falcon is located in McNairy County
  • Kossuth
    (10 miles [16.1 km] to the south)
  • Corinth
    (10 miles [16.1 km] to the southeast)
    • Jump to our Gazetteer entry for Corinth
    • Corinth is located in Alcorn County (MS)
    • Population from the 2020 Census: 14,435 people
    • Jump to TripAdvisor's Tourism page for Corinth <3>
  • Caffey
    (10 miles [16.1 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Caffey. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Caffey
    • Caffey is located in McNairy County
  • Allentown
    (11 miles [17.7 km] to the south)
    • Jump to our Gazetteer entry for Allentown
    • Allentown is located in Alcorn County (MS)
  • Selmer
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Selmer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Selmer
    • Selmer is located in McNairy County
    • Population from the 2020 Census: 4,280 people
    • Jump to TripAdvisor's Tourism page for Selmer <3>
  • Middleton
    (12 miles [19.3 km] to the west)
  • Walnut
    (13 miles [20.9 km] to the west)
    • Jump to our Gazetteer entry for Walnut
    • Walnut is located in Tippah County (MS)
    • Population from the 2020 Census: 736 people
    • Jump to TripAdvisor's Tourism page for Walnut <3>
  • Hightown
    (13 miles [20.9 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Hightown. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Hightown
    • Hightown is located in Alcorn County (MS)
  • Michie
    (13 miles [20.9 km] to the east)
  • Rose Creek
    (13 miles [20.9 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Rose Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Rose Creek
    • Rose Creek is located in McNairy County
  • Biggersville
    (14 miles [22.5 km] to the southeast)
    • Jump to our Gazetteer entry for Biggersville
    • Biggersville is located in Alcorn County (MS)
  • Farmington
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Farmington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmington
    • Farmington is located in Alcorn County (MS)
    • Population from the 2020 Census: 2,160 people
  • Tiplersville
    (15 miles [24.1 km] to the southwest)
    • Jump to our Gazetteer entry for Tiplersville
    • Tiplersville is located in Tippah County (MS)
  • Bethel Springs
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Bethel Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bethel Springs
    • Bethel Springs is located in McNairy County
    • Population from the 2020 Census: 727 people
    • Jump to TripAdvisor's Tourism page for Bethel Springs <3>
  • Hornsby
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hornsby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hornsby
    • Hornsby is located in Hardeman County
    • Population from the 2020 Census: 259 people
  • Purdy
    (16 miles [25.7 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Purdy. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Purdy
    • Purdy is located in McNairy County
  • Rogers Springs
    (16 miles [25.7 km] to the west)
    • Jump to our Gazetteer entry for Rogers Springs
    • Rogers Springs is located in Hardeman County
  • Searcy Town
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Searcy Town have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Searcy Town
    • Searcy Town is located in Alcorn County (MS)
  • Stantonville
    (17 miles [27.4 km] to the northeast)
    • Jump to our Gazetteer entry for Stantonville
    • Stantonville is located in McNairy County
    • Population from the 2020 Census: 259 people

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Turner Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.0187, Longitude: -88.6778       In this case, the coordinates for the Turner Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025