Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Seals Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Seals Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Seals Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Winesap
(Less than 2 miles to the north)- Jump to our Gazetteer entry for Winesap
- Winesap is located in Bledsoe County
- Newton
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Newton
- Newton is located in Cumberland County
- Estimated population in 2014: 2,968 people
- Newton has also been known as:
- Peay
- Ninemile
(5 miles [8 km] to the southeast)- Jump to our Gazetteer entry for Ninemile
- Ninemile is located in Bledsoe County
- Pikeville
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Pikeville
- Pikeville is located in Bledsoe County
- Population from the 2020 Census: 1,781 people
- Jump to TripAdvisor's Tourism page for Pikeville <2>
- Burke
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Burke
- Burke is located in Cumberland County
- Todd Town
(10 miles [16.1 km] to the north) - Lantana
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Lantana
- Lantana is located in Cumberland County
- Lake Tansi Village
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Lake Tansi Village
- Lake Tansi Village is located in Cumberland County
- Population from the 2010 Census: 3,803 people
- Summer City
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Summer City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summer City
- Summer City is located in Bledsoe County
- Jewett
(13 miles [20.9 km] to the east) - Sweetgum
(13 miles [20.9 km] to the west) - Clarktown
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Clarktown
- Clarktown is located in White County
- Estimated population in 2014: 146,806 people
- Spencer
(15 miles [24.1 km] to the west)- Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spencer
- Spencer is located in Van Buren County
- Population from the 2020 Census: 1,710 people
- Jump to TripAdvisor's Tourism page for Spencer <2>
- Brockdell
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Brockdell
- Brockdell is located in Bledsoe County
- Cumberland Spring
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Cumberland Spring
- Cumberland Spring is located in Rhea County
- Crossville
(16 miles [25.7 km] to the northeast)- Jump to our Gazetteer entry for Crossville
- Crossville is located in Cumberland County
- Population from the 2020 Census: 11,899 people
- Jump to TripAdvisor's Tourism page for Crossville <2>
- Pleasant Hill
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Cumberland County
- Population from the 2020 Census: 558 people
- Cummingsville
(16 miles [25.7 km] to the west)- Note: The GPS coordinates that we are using for Cummingsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cummingsville
- Cummingsville is located in Van Buren County
- Brayton
(17 miles [27.4 km] to the south) - Ravenscroft
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Ravenscroft
- Ravenscroft is located in White County
- Greenbriar Village
(17 miles [27.4 km] to the northeast)- Note: The GPS coordinates that we are using for Greenbriar Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbriar Village
- Greenbriar Village is located in Cumberland County
- Estimated population in 2014: 1,103 people
- Spring City
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Spring City
- Spring City is located in Rhea County
- Population from the 2020 Census: 1,839 people
- Jump to TripAdvisor's Tourism page for Spring City <2>
- Dayton
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for Dayton
- Dayton is located in Rhea County
- Population from the 2020 Census: 7,332 people
- Jump to TripAdvisor's Tourism page for Dayton <2>
- Crab Orchard
(19 miles [30.6 km] to the northeast)- Note: The GPS coordinates that we are using for Crab Orchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crab Orchard
- Crab Orchard is located in Cumberland County
- Population from the 2020 Census: 758 people
- Jump to TripAdvisor's Tourism page for Crab Orchard <2>
- Creston
(19 miles [30.6 km] to the north)- Jump to our Gazetteer entry for Creston
- Creston is located in Cumberland County
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Seals Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.7412, Longitude: -85.1766 In this case, the coordinates for the Seals Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |