RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Monroe County >> Belltown Mill >> Tidbits & TriviaIndex...

Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Belltown Mill, we use the following websites to find information relevant to Belltown Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Belltown Mill:
    • 35.425078, -84.254640
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • Open the Heavens-Above website centered on Belltown Mill
  • Bird Watching ...
    • We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
    • The eBird website is organized on a county-by-county basis. We have selected Monroe County as the starting point when you click on the link below:
    • Open the eBird sighting report for Monroe County
    • Since Belltown Mill is near McMinn County and also Blount County, we have provided a link to their eBird sighting reports:
    • Open the eBird sighting report for McMinn County
    • Open the eBird sighting report for Blount County
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Open the Waymark.com report for Belltown Mill

Curious and Interesting Names Near Belltown Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Acorn
    (3 miles [4.8 km] to the northeast)
    • Acorn is located in Monroe County
    • Jump to our Gazetteer entry for Acorn
  • Ballplay
    (3 miles [4.8 km] to the northeast)
    • Ballplay is located in Monroe County
    • Jump to our Gazetteer entry for Ballplay
  • Belltown
    (Less than 2 miles to the northeast)
    • Belltown is located in Monroe County
    • Jump to our Gazetteer entry for Belltown
  • Big Creek
    (3 miles [4.8 km] to the northwest)
    • Big Creek is located in Monroe County
    • Jump to our Gazetteer entry for Big Creek
  • Chestnut Valley
    (4 miles [6.4 km] to the east)
    • Chestnut Valley is located in Monroe County
    • Jump to our Gazetteer entry for Chestnut Valley
  • Ebenezer
    (7 miles [11.3 km] to the west)
    • Ebenezer is located in Monroe County
    • Jump to our Gazetteer entry for Ebenezer
  • Hopewell Mill
    (6 miles [9.7 km] to the north)
    • Hopewell Mill is located in Monroe County
    • Jump to our Gazetteer entry for Hopewell Mill
  • Jacktown
    (4 miles [6.4 km] to the south)
    • Jacktown is located in Monroe County
    • Jump to our Gazetteer entry for Jacktown
    • Estimated population in 2014: 67,319 people
  • Mount Harmony
    (6 miles [9.7 km] to the southwest)
    • Mount Harmony is located in Monroe County
    • Jump to our Gazetteer entry for Mount Harmony
  • Notchy Creek
    (7 miles [11.3 km] to the west)
    • Notchy Creek is located in Monroe County
    • Jump to our Gazetteer entry for Notchy Creek
  • Rocky Spring
    (6 miles [9.7 km] to the northwest)
    • Rocky Spring is located in Monroe County
    • Jump to our Gazetteer entry for Rocky Spring
  • Sink ‑ Historic
    (2 miles [3.2 km] to the west)
    • Sink is located in Monroe County
    • Jump to our Gazetteer entry for Sink
  • Tariffville
    (6 miles [9.7 km] to the northeast)
    • Tariffville is located in Monroe County
    • Jump to our Gazetteer entry for Tariffville
  • Three Points
    (6 miles [9.7 km] to the northeast)
    • Three Points is located in Monroe County
    • Jump to our Gazetteer entry for Three Points

How Far From Belltown Mill to ...

We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Belltown Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<1> beginning in Belltown Mill and extending to:

  • Madisonville, which is the Seat of Monroe County, lies 9 miles [14.5 km]<1> to the northwest. If you could walk a straight line from Belltown Mill to Madisonville, with an average speed<2> of 2.2 miles [3.5 km] per hour, it would take four to five hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take a little over three hours.
  • Nashville, which is the State Capital of Tennessee, lies 150 miles [241.4 km] to the west northwest (WNW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than three hours, a buggy would take 6 days and walking would take 9 days.
  • The White House (Washington, DC) is 463 miles [745.1 km] to the east northeast (ENE). Driving would take most of a day, a buggy would take 18 days and walking would take 27 days.
  • The shortest distance<3> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,355 miles [10,227.4 km] and it lies to the northeast (NE).<4>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,065 miles [11,370 km] and it lies to the northeast (NE).<5>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,941 miles [7,951.8 km] and it lies to the northeast (NE).<6>'

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Belltown Mill) to Point B. In other words: 'As the crow flies'.
<2>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<3>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Belltown Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.Our distance measurements begin at a specific point in Belltown Mill. The point we use is located at these GPS coordinates - Latitude: 35.4251, Longitude: -84.2546       In this case, the coordinates for Belltown Mill have been provided by the Geographic Names Information System (GNIS).
<4>The calculated bearing (or angle) to Jerusalem is 312.232 degrees.
<5>The calculated bearing (or angle) to Mecca is 307.889 degrees.
<6>The calculated bearing (or angle) to the Vatican is 308.814 degrees.