Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Austins Mill had a post office and railroad service.
The following communities are listed based on their distance from Austins Mill, with the one closest to Austins Mill listed first.
- Persia
(2 miles [3.2 km] to the south)
- Persia is also located in Hawkins County
- Jump to our Gazetteer entry for Persia
- Rogersville
(2 miles [3.2 km] to the north)
- Strahl
(3 miles [4.8 km] to the southeast)
- Strahl is also located in Hawkins County
- Jump to our Gazetteer entry for Strahl
- Otes
(4 miles [6.4 km] to the south)
- Otes is also located in Hawkins County
- Jump to our Gazetteer entry for Otes
- Amis
(4 miles [6.4 km] to the northeast)
- Amis is also located in Hawkins County
- Jump to our Gazetteer entry for Amis
- Saint Clair
(5 miles [8 km] to the southwest)
- Saint Clair is also located in Hawkins County
- Jump to our Gazetteer entry for Saint Clair
- Choptack
(5 miles [8 km] to the west)
- Choptack is also located in Hawkins County
- Jump to our Gazetteer entry for Choptack
- White Horn
(6 miles [9.7 km] to the southwest)
- White Horn is also located in Hawkins County
- Jump to our Gazetteer entry for White Horn
- Romeo
(6 miles [9.7 km] to the southeast)
- Romeo is located in Greene County
- Jump to our Gazetteer entry for Romeo
- Pilot Knob
(7 miles [11.3 km] to the south)
- Pilot Knob is located in Greene County
- Jump to our Gazetteer entry for Pilot Knob
- Alumwell
(7 miles [11.3 km] to the north)
- Alumwell is also located in Hawkins County
- Jump to our Gazetteer entry for Alumwell
- Bulls Gap
(8 miles [12.9 km] to the southwest)
- Marvin
(8 miles [12.9 km] to the south)
- Marvin is located in Greene County
- Jump to our Gazetteer entry for Marvin
- Morelock ‑ Historic
(8 miles [12.9 km] to the southeast)
- Morelock was located in Greene County
- Jump to our Gazetteer entry for Morelock
- New Hope
(8 miles [12.9 km] to the east)
- New Hope is also located in Hawkins County
- Jump to our Gazetteer entry for New Hope
- Vogel ‑ Historic
(8 miles [12.9 km] to the northeast)
- Vogel was located in Hawkins County
- Jump to our Gazetteer entry for Vogel
- Gillenwater ‑ Historic
(8 miles [12.9 km] to the north)
- Gillenwater was located in Hawkins County
- Jump to our Gazetteer entry for Gillenwater
- Lee Valley
(9 miles [14.5 km] to the northwest)
- Lee Valley is also located in Hawkins County
- Jump to our Gazetteer entry for Lee Valley
- Galbraith Springs
(9 miles [14.5 km] to the west)
- Galbraith Springs is also located in Hawkins County
- Jump to our Gazetteer entry for Galbraith Springs
- Eidson
(9 miles [14.5 km] to the north)
- Eidson is also located in Hawkins County
- Jump to our Gazetteer entry for Eidson
- Whitesburg
(10 miles [16.1 km] to the southwest)
- Albany
(10 miles [16.1 km] to the southeast)
- Albany is located in Greene County
- Jump to our Gazetteer entry for Albany
- Ottway
(10 miles [16.1 km] to the southeast)
- Ottway is located in Greene County
- Jump to our Gazetteer entry for Ottway
- Van Hill
(10 miles [16.1 km] to the east)
- Van Hill is also located in Hawkins County
- Jump to our Gazetteer entry for Van Hill
- Surgoinsville
(10 miles [16.1 km] to the northeast)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Austins Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |