Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Archville in the Atlas, the following communities of the 1890's would have been found near the current location of Archville. The following communities are listed based on their distance, with the one closest to Archville listed first.
- Reliance
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reliance
- Reliance is located in Polk County
- Jump to TripAdvisor's Tourism page for Reliance <3>
- Rymers ‑ Historic
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Rymers have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rymers
- Rymers is located in Polk County
- Parksville
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Parksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parksville
- Parksville is located in Polk County
- Chable ‑ Historic
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Chable have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chable
- Chable is located in Polk County
- Sylco
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Sylco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylco
- Sylco is located in Polk County
- Servilla
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Servilla have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Servilla
- Servilla is located in Polk County
- Benton
(7 miles [11.3 km] to the west)
- Fetzerton ‑ Historic
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Fetzerton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fetzerton
- Fetzerton is located in Polk County
- Turtletown
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Turtletown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turtletown
- Turtletown is located in Polk County
- Jump to TripAdvisor's Tourism page for Turtletown <3>
- Patty
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Patty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patty
- Patty is located in Polk County
- Ducktown
(10 miles [16.1 km] to the southeast)
- Ocoee
(10 miles [16.1 km] to the west)
- Alaculsy
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Alaculsy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alaculsy
- Alaculsy is located in Murray County (GA)
- Carlock
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Carlock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carlock
- Carlock is located in McMinn County
- Oldfort
(12 miles [19.3 km] to the west)
- Luskville
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Luskville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Luskville
- Luskville is located in McMinn County
- Google driving directions:
- From your current location to Luskville
- From Archville to Luskville
- Doogan
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Doogan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doogan
- Doogan is located in Murray County (GA)
- Wehutty
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Wehutty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wehutty
- Wehutty is located in Cherokee County (NC)
- Epperson
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Epperson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Epperson
- Epperson is located in Monroe County
- Google driving directions:
- From your current location to Epperson
- From Archville to Epperson
- Climer
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Climer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climer
- Climer is located in Bradley County
- Conasauga
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Conasauga have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conasauga
- Conasauga is located in Polk County
- Jump to TripAdvisor's Tourism page for Conasauga <3>
- Pierceville
(14 miles [22.5 km] to the southeast)
- Wolf Creek
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Wolf Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolf Creek
- Wolf Creek is located in Cherokee County (NC)
- Grady
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Grady have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grady
- Grady is located in McMinn County
- Williamsburg
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsburg
- Williamsburg is located in McMinn County
- Kyle
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Kyle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kyle
- Kyle is located in Fannin County (GA)
- Hiwassee
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Hiwassee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiwassee
- Hiwassee is located in Cherokee County (NC)
- Coker Creek
(15 miles [24.1 km] to the northeast)
- Rural Vale
(15 miles [24.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rural Vale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rural Vale
- Rural Vale is located in Monroe County
- Google driving directions:
- From your current location to Rural Vale
- From Archville to Rural Vale
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Archville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |