RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Dewey County >> Ridgeview >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
South Dakota


The Commemorative Quarter for South Dakota







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Ridgeview. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Ridgeview.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Ridgeview - within 27 miles [43.5 km]<1>.

Unless noted otherwise, the following communities are located in Dewey County.

Our list sorts the communities in alphabetical order. There are 7 communities listed:

  • Eagle Butte
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Eagle Butte have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eagle Butte
    • Eagle Butte is located in Dewey County
    • Population from the 2020 Census: 1,418 people
    • Jump to TripAdvisor's Tourism page for Eagle Butte <3>
  • Glencross
    (25 miles [40.2 km] to the north)
  • Mission Ridge
    (27 miles [43.5 km] to the south)
  • Parade
    (15 miles [24.1 km] to the west)
  • Timber Lake
    (27 miles [43.5 km] to the northwest)
  • Trail City
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Trail City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trail City
    • Trail City is located in Corson County
    • Jump to TripAdvisor's Tourism page for Trail City <3>
  • Whitehorse
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Whitehorse have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitehorse
    • Whitehorse is located in Dewey County
    • Population from the 2010 Census: 276 people
    • Jump to TripAdvisor's Tourism page for Whitehorse <3>

Unfortunately, we don't know of an official website for Ridgeview. If you can help, please contact us through our Feedback Page.

The official website for State of South Dakota: sd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Ridgeview) to Point B.Our distance measurements begin at a specific point in Ridgeview. The point we use is located at these GPS coordinates - Latitude: 45.0850, Longitude: -100.8004       In this case, the coordinates for Ridgeview have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024