Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Okobojo Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Okobojo Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Okobojo Cemetery. We've listed the following communities based on their distance, with the closest first.
- Okobojo
(Less than 2 miles to the southwest) - Onida
(15 miles [24.1 km] to the east)- Jump to our Gazetteer entry for Onida
- Onida is located in Sully County
- Population from the 2020 Census: 628 people
- Jump to TripAdvisor's Tourism page for Onida <3>
- Pierre
(19 miles [30.6 km] to the south)- Note: The GPS coordinates that we are using for Pierre have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pierre
- Pierre is located in Hughes County
- Population from the 2020 Census: 13,708 people
- Jump to TripAdvisor's Tourism page for Pierre <3>
- Agar
(19 miles [30.6 km] to the northeast)- Note: The GPS coordinates that we are using for Agar have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Agar
- Agar is located in Sully County
- Population from the 2020 Census: 80 people
- Jump to TripAdvisor's Tourism page for Agar <3>
- Fort Pierre
(20 miles [32.2 km] to the south)- Jump to our Gazetteer entry for Fort Pierre
- Fort Pierre is located in Stanley County
- Population from the 2020 Census: 2,236 people
- Jump to TripAdvisor's Tourism page for Fort Pierre <3>
- Blunt
(20 miles [32.2 km] to the southeast)- Jump to our Gazetteer entry for Blunt
- Blunt is located in Hughes County
- Population from the 2020 Census: 352 people
- Jump to TripAdvisor's Tourism page for Blunt <3>
- Mission Ridge
(21 miles [33.8 km] to the west)- Jump to our Gazetteer entry for Mission Ridge
- Mission Ridge is located in Stanley County
- Estimated population in 2014: 177 people
- Jump to TripAdvisor's Tourism page for Mission Ridge <3>
- Canning
(24 miles [38.6 km] to the southeast) - Forest City
(24 miles [38.6 km] to the north)- Note: The GPS coordinates that we are using for Forest City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Potter County
- Alto
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for Alto
- Alto is located in Hughes County
- Rousseau
(27 miles [43.5 km] to the southeast)
Off-the-Road Links ...
The official website for Sully County: www.sullycounty.net/
The official website for State of South Dakota: https://www.sd.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Okobojo Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.6569, Longitude: -100.3651 In this case, the coordinates for the Okobojo Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |