Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Cedarbutte Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Cedarbutte Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Cedarbutte Cemetery. We've listed the following communities based on their distance, with the closest first.
- Norris
(10 miles [16.1 km] to the southwest)
- White River
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for White River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White River
- White River is located in Mellette County
- Population from the 2020 Census: 586 people
- Jump to TripAdvisor's Tourism page for White River <2>
- Belvidere
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Belvidere have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belvidere
- Belvidere is located in Jackson County
- Population from the 2020 Census: 56 people
- Jump to TripAdvisor's Tourism page for Belvidere <2>
- Parmelee
(19 miles [30.6 km] to the south)
- Long Valley
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Long Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Valley
- Long Valley is located in Jackson County
- Jump to TripAdvisor's Tourism page for Long Valley <2>
- Okaton
(22 miles [35.4 km] to the northeast)
- Westover ‑ Historic
(23 miles [37 km] to the northeast)
- Jump to our Gazetteer entry for Westover
- Westover is located in Jones County
- Estimated population in 2014: 6 people
- Kadoka
(26 miles [41.8 km] to the northwest)
- Murdo
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Murdo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murdo
- Murdo is located in Jones County
- Population from the 2020 Census: 459 people
- Jump to TripAdvisor's Tourism page for Murdo <2>
- Two Strike
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Two Strike have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Two Strike
- Two Strike is located in Todd County
- Population from the 2010 Census: 209 people
- Rosebud
(28 miles [45.1 km] to the southeast)
- Wanblee
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Wanblee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wanblee
- Wanblee is located in Jackson County
- Population from the 2010 Census: 725 people
- Jump to TripAdvisor's Tourism page for Wanblee <2>
- Vetal
(29 miles [46.7 km] to the southwest)
- Jump to our Gazetteer entry for Vetal
- Vetal is located in Bennett County
Off-the-Road Links ...
The official website for State of South Dakota: https://www.sd.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Cedarbutte Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.5999, Longitude: -101.1005 In this case, the coordinates for the Cedarbutte Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |