RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> Province of Ontario >> Reids MillsIndex...
















Welcome to Reids Mills ...

Although we found mention of Reids Mills during our research, we really don't have any information about it.<1> Given the context of how Reids Mills was mentioned, we believe that it was a community rather than a locale or some type of landmark. We have done a cursory search and if it was a community, we haven't been able to find any evidence that it still exists..

We've added Reids Mills to our Gazetteer with the hope that we can develop more information. If you can help us with Reids Mills, please Contact Us.




A typical abbreviation for Reids Mills: Reids Mls. (or less commonly used: Reids Mlls.)

See our Genealogy Helper Page for Reids Mills for more information about variations on the name of Reids Mills.

Time Zone: The area where we believe that Reids Mills might be (or was) located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time. The time zone in French: EST- Heure Normale de l'Est (HNE), EDT- Heure Avancée de l'Est (HAE).

We believe that Reids Mills would be found within the (613) & (343)<2> area codes.

Communities Also Named Reids Mills ...

For more information, see our Tidbits & Trivia Page for Reids Mills.

Communities near Reids Mills ...

We have created a list of 10 communities that are near Reids Mills.

  • Merrickville - Wolford
    (18 miles [29 km] to the southwest)
  • Reeve Craig
    (4 miles [6.4 km] to the west)
  • Kars
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kars came from an uncertain source and they still need to be verified:<3>
    • Jump to our Gazetteer entry for Kars
    • Jump to TripAdvisor's Tourism page for Kars <4>
  • Mountain
    (5 miles [8 km] to the southeast)
    • Jump to our Gazetteer entry for Mountain
  • Harmony
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for Harmony
  • VanCamp
    (6 miles [9.7 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for VanCamp. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • Jump to our Gazetteer entry for VanCamp
  • Vernon
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for Vernon
  • Cloverdale
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Cloverdale came from an uncertain source and they still need to be verified:<3>
    • Jump to our Gazetteer entry for Cloverdale
  • Herbert Corners
    (7 miles [11.3 km] to the north)
  • Kemptville
    (7 miles [11.3 km] to the southwest)

TripAdvisor Tourism Pages for Reids Mills ...

Looking for more information about Reids Mills? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Reids Mills, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Reids Mills.

The official website for Province of Ontario: https://www.ontario.ca/

Footnotes ...

<1>If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer. For example, we might find a sentence like "He went north past Reids Mills and then turned west". While Reids Mills could be some kind of landmark, we think that it's more likely to be a community. We've added Reids Mills as a placeholder with the hope that we'll be able to add more information in the future.

Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Mile's to see Pete ... Mile's is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name.

Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time.

Also keep in mind that Reids Mills could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong . Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out.
<2>Area code (343) is an overlay for area code (613).
<3>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Oct 2024