Welcome to Dalton Mills ...
A typical abbreviation for Dalton Mills: Dalton Mls. (or less commonly used: Dalton Mlls.)
Dalton Mills is 1,260 feet [384 m] above sea level.<1>.
Time Zone: Dalton Mills lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time. The time zone in French: EST- Heure Normale de l'Est (HNE), EDT- Heure Avancée de l'Est (HAE).
Area Codes for Dalton Mills: 705, 249 & 683<2>
Communities Also Named Dalton Mills ...
Using our Gazetteer, we found another community named Dalton Mills - it's located in Ontario.
For more information, see our Tidbits & Trivia Page for Dalton Mills.
Communities near Dalton Mills ...
We have created a list of 10 communities that are near Dalton Mills.
- Bolkow
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bolkow came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Bolkow
- Carry
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Carry came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Carry
- Missanabie
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Missanabie
- Missanabie has also been known as:
- Missanabie
- Wayland
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Wayland came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Wayland
- Gutelius
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Gutelius came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Gutelius
- Nicholson
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Nicholson came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Nicholson
- Lochalsh
(18 miles [29 km] to the northwest)
- Jump to our Gazetteer entry for Lochalsh
- Renabie
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Renabie came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Renabie
- Musk
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Musk came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Musk
- Alden
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Alden came from an uncertain source and they still need to be verified:<3>
- Jump to our Gazetteer entry for Alden
TripAdvisor Tourism Pages for Dalton Mills ...
Looking for more information about Dalton Mills? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Dalton Mills, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Dalton Mills.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Dalton Mills. If you can help, please contact us through our Feedback Page.
The official website for Province of Ontario: https://www.ontario.ca/
Footnotes ...
| <1> | The elevation is an estimate for the area around Dalton Mills - it will be higher in some places and lower in others. |
| <2> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 705 code has been Overlayed with one of the following codes: 249 or 683. New phone numbers in the Dalton Mills area will be assigned with one of these codes: 705, 249 or 683. As a result, placing a call in the Dalton Mills area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <3> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |