Census Data for Wolco
As far as we can tell, Wolco has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Wolco, you might be interested in some nearby communities where we do:
- Avant
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Avant have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avant
- Avant is located in Osage County
- Jump to TripAdvisor's Tourism page for Avant <2>
- Barnsdall
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Barnsdall have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnsdall
- Barnsdall is located in Osage County
- Jump to TripAdvisor's Tourism page for Barnsdall <2>
- Ochelata
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Ochelata have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ochelata
- Ochelata is located in Washington County
- Jump to TripAdvisor's Tourism page for Ochelata <2>
- Ramona
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Ramona have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ramona
- Ramona is located in Washington County
- Jump to TripAdvisor's Tourism page for Ramona <2>
- Skiatook
(12 miles [19.3 km] to the south)
- Vera
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Vera have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vera
- Vera is located in Washington County
- Jump to TripAdvisor's Tourism page for Vera <2>
- Wynona
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Wynona have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wynona
- Wynona is located in Osage County
- Jump to TripAdvisor's Tourism page for Wynona <2>
- Bartlesville
(15 miles [24.1 km] to the north)
- Collinsville
(17 miles [27.4 km] to the southeast)
- Pawhuska
(17 miles [27.4 km] to the northwest)
- Sperry
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Sperry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sperry
- Sperry is located in Tulsa County
- Jump to TripAdvisor's Tourism page for Sperry <2>
- Dewey
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Dewey have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dewey
- Dewey is located in Washington County
- Jump to TripAdvisor's Tourism page for Dewey <2>
- Continue List (103 more) ...
- Hominy
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hominy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hominy
- Hominy is located in Osage County
- Jump to TripAdvisor's Tourism page for Hominy <2>
- Talala
(20 miles [32.2 km] to the east)
- Oologah
(21 miles [33.8 km] to the east)
Osage County ...
Wolco is located in Osage County<3>.
For more information, please visit our Census Page for Osage County.
Miscellaneous Information for Wolco ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Osage County or the community of Wolco:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Wolco:
- GNIS ID for Wolco: 1100948
- GNIS ID for Osage County: 1101844
- GNIS ID for State of Oklahoma: 1102857
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 40 (Oklahoma)
- County Code: 113 (Osage County)
- Place Code: 81850 (Wolco)
- State & County Code: 40/113 (Oklahoma / Osage County)
- State & Place Code: 40/81850 (Oklahoma / Wolco)
- Misc. Census Codes ...
- Wolco is located in Census Region #3 (the South Region) and Division #7 (the West South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Wolco.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Wolco. If you can help, please contact us through our Feedback Page.
The official website for State of Oklahoma: https://www.ok.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | If you're interested in how the shape of Oklahoma's counties, including Osage, have changed over time, we recommend the Atlas of Historical County Boundaries. |