TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Ravia. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Ravia.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Ravia - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 33 communities listed:
- Ardmore
(22 miles [35.4 km] to the west)
- Bromide
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Bromide have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bromide
- Bromide is located in Johnston County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Bromide <2>
- Caddo
(29 miles [46.7 km] to the east)
- Calera
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Calera have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calera
- Calera is located in Bryan County
- Population from the 2020 Census: 2,414 people
- Jump to TripAdvisor's Tourism page for Calera <2>
- Caney
(30 miles [48.3 km] to the east)
- Cartwright
(28 miles [45.1 km] to the southeast)
- Clarita
(24 miles [38.6 km] to the northeast)
- Colbert
(30 miles [48.3 km] to the southeast)
- Coleman
(19 miles [30.6 km] to the east)
- Connerville
(15 miles [24.1 km] to the northeast)
- Davis
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Davis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis
- Davis is located in Murray County
- Population from the 2020 Census: 2,854 people
- Jump to TripAdvisor's Tourism page for Davis <2>
- Dougherty
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Dougherty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dougherty
- Dougherty is located in Murray County
- Population from the 2020 Census: 221 people
- Jump to TripAdvisor's Tourism page for Dougherty <2>
- Durant
(26 miles [41.8 km] to the southeast)
- Fittstown
(26 miles [41.8 km] to the north)
- Fitzhugh
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Fitzhugh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fitzhugh
- Fitzhugh is located in Pontotoc County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for Fitzhugh <2>
- Gene Autry
(16 miles [25.7 km] to the west)
- Kenefic
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Kenefic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenefic
- Kenefic is located in Bryan County
- Population from the 2020 Census: 220 people
- Jump to TripAdvisor's Tourism page for Kenefic <2>
- Kingston
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Marshall County
- Population from the 2020 Census: 1,689 people
- Jump to TripAdvisor's Tourism page for Kingston <2>
- Lebanon
(19 miles [30.6 km] to the southwest)
- Lone Grove
(29 miles [46.7 km] to the west)
- Madill
(10 miles [16.1 km] to the south)
- Mannsville
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Johnston County
- Population from the 2020 Census: 844 people
- Jump to TripAdvisor's Tourism page for Mannsville <2>
- Marietta
(29 miles [46.7 km] to the southwest)
- Mead
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Mead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mead
- Mead is located in Bryan County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Mead <2>
- Milburn
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Milburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milburn
- Milburn is located in Johnston County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Milburn <2>
- Mill Creek
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Mill Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Creek
- Mill Creek is located in Johnston County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Mill Creek <2>
- Overbrook
(25 miles [40.2 km] to the southwest)
- Platter
(26 miles [41.8 km] to the southeast)
- Roff
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Roff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roff
- Roff is located in Pontotoc County
- Population from the 2020 Census: 715 people
- Jump to TripAdvisor's Tourism page for Roff <2>
- Springer
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Springer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springer
- Springer is located in Carter County
- Population from the 2020 Census: 698 people
- Jump to TripAdvisor's Tourism page for Springer <2>
- Sulphur
(22 miles [35.4 km] to the northwest)
- Tishomingo
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Tishomingo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tishomingo
- Tishomingo is located in Johnston County
- Population from the 2020 Census: 2,997 people
- Jump to TripAdvisor's Tourism page for Tishomingo <2>
- Wapanucka
(20 miles [32.2 km] to the northeast)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Ravia. If you can help, please contact us through our Feedback Page.
The official website for State of Oklahoma: https://www.ok.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Ravia) to Point B.Our distance measurements begin at a specific point in Ravia. The point we use is located at these GPS coordinates - Latitude: 34.2414, Longitude: -96.7546 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |