|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Youngsville had a population of 83 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Youngsville, with the one closest to Youngsville listed first.
- Harshasville
(Less than 2 miles to the southeast)
- Irvington ‑ Historic
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for Irvington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irvington
- Irvington is located in Adams County
- Seaman
(Less than 2 miles to the north)
- Cherry Fork
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Cherry Fork have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherry Fork
- Cherry Fork is located in Adams County
- Estimated population in 2016: 155 people
- Tranquility
(3 miles [4.8 km] to the northeast)
- Wheat Ridge
(4 miles [6.4 km] to the southeast)
- Winchester
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Winchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winchester
- Winchester is located in Adams County
- Population from the 2020 Census: 1,002 people
- Jump to TripAdvisor's Tourism page for Winchester <3>
- Buck Run ‑ Historic
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Buck Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buck Run
- Buck Run is located in Adams County
- Eckmansville
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Eckmansville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eckmansville
- Eckmansville is located in Adams County
- Dunkinsville
(6 miles [9.7 km] to the southeast)
- May Hill
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for May Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for May Hill
- May Hill is located in Adams County
- Google driving directions:
- From your current location to May Hill
- From Youngsville to May Hill
- Emerald
(7 miles [11.3 km] to the northwest)
- West Union
(8 miles [12.9 km] to the south)
- Peebles
(8 miles [12.9 km] to the east)
- Fairfax
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfax
- Fairfax is located in Highland County
- Fincastle
(9 miles [14.5 km] to the northwest)
- Decatur
(10 miles [16.1 km] to the southwest)
- Ash Ridge
(10 miles [16.1 km] to the west)
- Moore ‑ Historic
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Moore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moore
- Moore is located in Adams County
- Cedar Mills
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Cedar Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Mills
- Cedar Mills is located in Adams County
- Sugar Tree Ridge
(11 miles [17.7 km] to the northwest)
- Beaver Pond
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Beaver Pond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver Pond
- Beaver Pond is located in Adams County
- Locust Grove
(11 miles [17.7 km] to the northeast)
- Elmville
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Elmville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elmville
- Elmville is located in Highland County
- Google driving directions:
- From your current location to Elmville
- From Youngsville to Elmville
- Folsom
(11 miles [17.7 km] to the north)
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Youngsville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|