RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Putnam County >> Vaughnsville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Vaughnsville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Vaughnsville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Vaughnsville is located in Putnam County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Putnam County: Allen, Defiance, Hancock, Henry, Paulding, Van Wert & Wood.

Below are the counties that are near Vaughnsville. For each of these counties, we show a sample of those communities that are closest to Vaughnsville:

  • Putnam County     (The home county of Vaughnsville)
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Jones City
      (Less than 2 miles to the west)
      • Note: The GPS coordinates that we are using for Jones City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jones City
      • Jones City is located in Putnam County
    • Rimer
      (3 miles [4.8 km] to the west)
      • Jump to our Gazetteer entry for Rimer
      • Rimer is located in Putnam County
    • Columbus Grove
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Columbus Grove
      • Columbus Grove is located in Putnam County
      • Population from the 2020 Census: 2,061 people
      • Jump to TripAdvisor's Tourism page for Columbus Grove <2>
    • Kalida
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kalida
      • Kalida is located in Putnam County
      • Population from the 2020 Census: 1,583 people
      • Jump to TripAdvisor's Tourism page for Kalida <2>
    • Fort Jennings
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Jennings
      • Fort Jennings is located in Putnam County
      • Population from the 2020 Census: 495 people
      • Jump to TripAdvisor's Tourism page for Fort Jennings <2>
    • Glandorf
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glandorf
      • Glandorf is located in Putnam County
      • Population from the 2020 Census: 1,030 people
      • Jump to TripAdvisor's Tourism page for Glandorf <2>
    • Ottawa
      (10 miles [16.1 km] to the northeast)
    • Pandora
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pandora
      • Pandora is located in Putnam County
      • Population from the 2020 Census: 1,101 people
    • Muntanna
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Muntanna. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Muntanna
      • Muntanna is located in Putnam County
    • Ottoville
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Ottoville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ottoville
      • Ottoville is located in Putnam County
      • Population from the 2020 Census: 960 people
      • Jump to TripAdvisor's Tourism page for Ottoville <2>
    • Cloverdale
      (12 miles [19.3 km] to the northwest)
      • Jump to our Gazetteer entry for Cloverdale
      • Cloverdale is located in Putnam County
      • Population from the 2020 Census: 159 people
    • Dupont
      (14 miles [22.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Dupont. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Dupont
      • Dupont is located in Putnam County
      • Population from the 2020 Census: 301 people
      • Jump to TripAdvisor's Tourism page for Dupont <2>
  • Allen County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Gomer
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gomer
      • Gomer is located in Allen County
      • Jump to TripAdvisor's Tourism page for Gomer <2>
    • Cairo
      (4 miles [6.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cairo
      • Cairo is located in Allen County
      • Population from the 2020 Census: 520 people
    • West Cairo
      (4 miles [6.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Cairo
      • West Cairo is located in Allen County
    • Elida
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elida
      • Elida is located in Allen County
      • Population from the 2020 Census: 1,810 people
    • Scotts Crossing
      (7 miles [11.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Scotts Crossing. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Scotts Crossing
      • Scotts Crossing is located in Allen County
    • Beaverdam
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdam
      • Beaverdam is located in Allen County
      • Population from the 2020 Census: 369 people
      • Jump to TripAdvisor's Tourism page for Beaverdam <2>
    • Lima
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Lima
      • Lima is located in Allen County
      • Population from the 2020 Census: 36,440 people
      • Jump to TripAdvisor's Tourism page for Lima <2>
    • Delphos
      (10 miles [16.1 km] to the west)
    • Southworth
      (12 miles [19.3 km] to the southwest)
      • Jump to our Gazetteer entry for Southworth
      • Southworth is located in Allen County
    • Bluffton
      (13 miles [20.9 km] to the east)
    • Fort Shawnee
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Fort Shawnee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Shawnee
      • Fort Shawnee is located in Allen County
      • Estimated population in 2012: 3,643 people
    • Conant
      (13 miles [20.9 km] to the southwest)
      • Jump to our Gazetteer entry for Conant
      • Conant is located in Allen County
  • Auglaize County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Cridersville
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cridersville
      • Cridersville is located in Auglaize County
      • Population from the 2020 Census: 1,780 people
      • Jump to TripAdvisor's Tourism page for Cridersville <2>
    • Buckland
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Buckland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buckland
      • Buckland is located in Auglaize County
      • Population from the 2020 Census: 221 people
    • Uniopolis
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Uniopolis
      • Uniopolis is located in Auglaize County
      • Estimated population in 2016: 220 people
    • Wapakoneta
      (21 miles [33.8 km] to the south)
    • Waynesfield
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Waynesfield
      • Waynesfield is located in Auglaize County
      • Population from the 2020 Census: 815 people
    • Pusheta Town ‑ Historic
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Pusheta Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pusheta Town
      • Pusheta Town is located in Auglaize County
    • Saint Johns
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Saint Johns
      • Saint Johns is located in Auglaize County
    • Moulton
      (23 miles [37 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Moulton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Moulton
      • Moulton is located in Auglaize County
    • Fryburg
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Fryburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Fryburg
      • Fryburg is located in Auglaize County
    • Saint Marys
      (26 miles [41.8 km] to the southwest)
    • New Knoxville
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for New Knoxville
      • New Knoxville is located in Auglaize County
      • Population from the 2020 Census: 862 people
    • Santa Fe
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Santa Fe
      • Santa Fe is located in Auglaize County
  • Defiance County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Ayersville
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Ayersville
      • Ayersville is located in Defiance County
    • Defiance
      (29 miles [46.7 km] to the north)
    • Williamstown
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamstown
      • Williamstown is located in Defiance County
  • Hancock County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Mount Cory
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Mount Cory
      • Mount Cory is located in Hancock County
      • Population from the 2020 Census: 195 people
    • Moffitt ‑ Historic
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Moffitt. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Moffitt
      • Moffitt is located in Hancock County
    • Cannonsburg ‑ Historic
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Cannonsburg
      • Cannonsburg is located in Hancock County
    • Rawson
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rawson
      • Rawson is located in Hancock County
      • Population from the 2020 Census: 552 people
      • Jump to TripAdvisor's Tourism page for Rawson <2>
    • Benton Ridge
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benton Ridge
      • Benton Ridge is located in Hancock County
      • Population from the 2020 Census: 289 people
    • New Stark
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for New Stark have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Stark
      • New Stark is located in Hancock County
    • Jenera
      (22 miles [35.4 km] to the east)
    • Lewisburg ‑ Historic
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lewisburg
      • Lewisburg is located in Hancock County
    • Hancock
      (24 miles [38.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hancock. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hancock
      • Hancock is located in Hancock County
    • McComb
      (24 miles [38.6 km] to the northeast)
    • Arlington
      (26 miles [41.8 km] to the east)
    • Williamstown
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamstown
      • Williamstown is located in Hancock County
  • Hardin County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Ada
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ada
      • Ada is located in Hardin County
      • Population from the 2020 Census: 5,532 people
      • Jump to TripAdvisor's Tourism page for Ada <2>
    • Alger
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alger
      • Alger is located in Hardin County
      • Population from the 2020 Census: 835 people
      • Jump to TripAdvisor's Tourism page for Alger <2>
    • Huntersville
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huntersville
      • Huntersville is located in Hardin County
    • McGuffey
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for McGuffey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGuffey
      • McGuffey is located in Hardin County
      • Population from the 2020 Census: 484 people
    • Dola
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dola
      • Dola is located in Hardin County
      • Jump to TripAdvisor's Tourism page for Dola <2>
    • Dunkirk
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunkirk
      • Dunkirk is located in Hardin County
      • Population from the 2020 Census: 842 people
      • Jump to TripAdvisor's Tourism page for Dunkirk <2>
    • Jumbo
      (28 miles [45.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Jumbo
      • Jumbo is located in Hardin County
  • Henry County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • New Bavaria
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for New Bavaria have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bavaria
      • New Bavaria is located in Henry County
      • Population from the 2020 Census: 93 people
    • Hamler
      (24 miles [38.6 km] to the north)
    • Holgate
      (25 miles [40.2 km] to the north)
    • Deshler
      (26 miles [41.8 km] to the northeast)
    • Elery
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Elery. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Elery
      • Elery is located in Henry County
    • Florida
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Florida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florida
      • Florida is located in Henry County
      • Population from the 2020 Census: 213 people
    • Malinta
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malinta
      • Malinta is located in Henry County
      • Population from the 2020 Census: 252 people
      • Jump to TripAdvisor's Tourism page for Malinta <2>
  • Logan County
    • Lakeview
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeview
      • Lakeview is located in Logan County
      • Population from the 2020 Census: 1,105 people
      • Jump to TripAdvisor's Tourism page for Lakeview <2>
  • Mercer County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Mendon
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mendon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mendon
      • Mendon is located in Mercer County
      • Population from the 2020 Census: 642 people
      • Jump to TripAdvisor's Tourism page for Mendon <2>
    • Mercer
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mercer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mercer
      • Mercer is located in Mercer County
    • Rockford
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockford
      • Rockford is located in Mercer County
      • Population from the 2020 Census: 1,105 people
      • Jump to TripAdvisor's Tourism page for Rockford <2>
    • Tama
      (30 miles [48.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Tama. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tama
      • Tama is located in Mercer County
  • Paulding County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Mandale
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Mandale
      • Mandale is located in Paulding County
    • Murat ‑ Historic
      (16 miles [25.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Murat. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Murat
      • Murat is located in Paulding County
      • Former names for Murat:
      • Hipp's Lock
      • Timberville
    • Oakwood
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Oakwood
      • Oakwood is located in Paulding County
      • Population from the 2020 Census: 582 people
    • Grover Hill
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Grover Hill
      • Grover Hill is located in Paulding County
      • Population from the 2020 Census: 377 people
    • Melrose
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Melrose
      • Melrose is located in Paulding County
      • Population from the 2020 Census: 259 people
    • Fort Brown
      (21 miles [33.8 km] to the northwest)
      • Jump to our Gazetteer entry for Fort Brown
      • Fort Brown is located in Paulding County
    • Saint Andrews ‑ Historic
      (21 miles [33.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Saint Andrews. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Saint Andrews
      • Saint Andrews is located in Paulding County
    • Charloe
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Charloe
      • Charloe is located in Paulding County
    • Hedges
      (23 miles [37 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Hedges. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hedges
      • Hedges is located in Paulding County
    • Broughton
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Broughton
      • Broughton is located in Paulding County
      • Population from the 2020 Census: 115 people
    • Haviland
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Haviland
      • Haviland is located in Paulding County
      • Population from the 2020 Census: 202 people
    • Dague ‑ Historic
      (25 miles [40.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Dague. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Dague
      • Dague is located in Paulding County
  • Shelby County
    • Botkins
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Botkins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Botkins
      • Botkins is located in Shelby County
      • Population from the 2020 Census: 1,160 people
      • Jump to TripAdvisor's Tourism page for Botkins <2>
  • Van Wert County
    • The following are listed by their distance from Vaughnsville, with the one closest to Vaughnsville listed first.
    • Middle Point
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middle Point
      • Middle Point is located in Van Wert County
      • Population from the 2020 Census: 557 people
      • Jump to TripAdvisor's Tourism page for Middle Point <2>
    • Venedocia
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Venedocia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Venedocia
      • Venedocia is located in Van Wert County
      • Population from the 2020 Census: 118 people
    • Hoaglin
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Hoaglin
      • Hoaglin is located in Van Wert County
    • Elgin
      (19 miles [30.6 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Elgin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Elgin
      • Elgin is located in Van Wert County
      • Population from the 2020 Census: 55 people
    • Monticello
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Monticello
      • Monticello is located in Van Wert County
    • Van Wert
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Van Wert have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Wert
      • Van Wert is located in Van Wert County
      • Population from the 2020 Census: 10,614 people
      • Jump to TripAdvisor's Tourism page for Van Wert <2>
    • Scott
      (23 miles [37 km] to the west)
    • Ohio City
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Ohio City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ohio City
      • Ohio City is located in Van Wert County
      • Population from the 2020 Census: 669 people
      • Jump to TripAdvisor's Tourism page for Ohio City <2>
    • Abanaka
      (29 miles [46.7 km] to the west)
      • Jump to our Gazetteer entry for Abanaka
      • Abanaka is located in Van Wert County
    • Convoy
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Convoy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Convoy
      • Convoy is located in Van Wert County
      • Population from the 2020 Census: 1,050 people
      • Jump to TripAdvisor's Tourism page for Convoy <2>
    • Glenmore
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Glenmore. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Glenmore
      • Glenmore is located in Van Wert County
  • Wood County
    • Hoytville
      (28 miles [45.1 km] to the northeast)
      • Jump to our Gazetteer entry for Hoytville
      • Hoytville is located in Wood County
      • Population from the 2020 Census: 318 people

For an expanded list of the communities that are closest to Vaughnsville, see our County-by-County Page for Vaughnsville.

Cemeteries Near Vaughnsville ...

Below are cemeteries that are in the vicinity of Vaughnsville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Vaughnsville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Vaughnsville, with the one closest to Vaughnsville listed first.

  • Clerenger Cemetery
    (Less than 2 miles to the south)
    • Jump to our Gazetteer entry for the Clerenger Cemetery
    • Note: The GPS coordinates that we are using for the Clerenger Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Pike Run Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Pike Run Cemetery
    • Note: The GPS coordinates that we are using for the Pike Run Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Carman Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Carman Cemetery
    • Note: The GPS coordinates that we are using for the Carman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Altstaetter Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the Altstaetter Cemetery
    • Note: The GPS coordinates that we are using for the Altstaetter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Truro Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Truro Cemetery
    • Note: The GPS coordinates that we are using for the Truro Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Reynolds Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Reynolds Cemetery
    • Note: The GPS coordinates that we are using for the Reynolds Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Ottawa River Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Ottawa River Cemetery
    • Note: The GPS coordinates that we are using for the Ottawa River Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Keirns Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Keirns Cemetery
    • Note: The GPS coordinates that we are using for the Keirns Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hadding Cemetery
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for the Hadding Cemetery
    • Note: The GPS coordinates that we are using for the Hadding Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Dutch Hollow Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Dutch Hollow Cemetery
    • Note: The GPS coordinates that we are using for the Dutch Hollow Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • West Cemetery
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for the West Cemetery
    • Note: The GPS coordinates that we are using for the West Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Anthony Cemetery
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for the St. Anthony Cemetery
    • Note: The GPS coordinates that we are using for the St. Anthony Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (406 more) ...
    • Hughes Cemetery
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for the Hughes Cemetery
      • Note: The GPS coordinates that we are using for the Hughes Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Westley Cemetery
      (5 miles [8 km] to the south)
      • Jump to our Gazetteer entry for the Westley Cemetery
      • Note: The GPS coordinates that we are using for the Westley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • East Cemetery
      (5 miles [8 km] to the southeast)
      • Jump to our Gazetteer entry for the East Cemetery
      • Note: The GPS coordinates that we are using for the East Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that Vaughnsville had a population of 139 people in 1895 with a post office and railroad service.

These communities are listed based on their distance from Vaughnsville, with the one closest to Vaughnsville listed first.

  • Gomer
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gomer
    • Gomer is located in Allen County
    • Jump to TripAdvisor's Tourism page for Gomer <2>
  • Rimer
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for Rimer
    • Rimer is located in Putnam County
  • Cairo
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cairo
    • Cairo is located in Allen County
    • Population from the 2020 Census: 520 people
  • West Cairo
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Cairo
    • West Cairo is located in Allen County
  • Columbus Grove
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbus Grove
    • Columbus Grove is located in Putnam County
    • Population from the 2020 Census: 2,061 people
    • Jump to TripAdvisor's Tourism page for Columbus Grove <2>
  • Rushmore
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Rushmore have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rushmore
    • Rushmore is located in Putnam County
  • Scotts Crossing
    (7 miles [11.3 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Scotts Crossing. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Scotts Crossing
    • Scotts Crossing is located in Allen County
  • Elida
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elida
    • Elida is located in Allen County
    • Population from the 2020 Census: 1,810 people
  • Kalida
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kalida
    • Kalida is located in Putnam County
    • Population from the 2020 Census: 1,583 people
    • Jump to TripAdvisor's Tourism page for Kalida <2>
  • Fort Jennings
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Jennings
    • Fort Jennings is located in Putnam County
    • Population from the 2020 Census: 495 people
    • Jump to TripAdvisor's Tourism page for Fort Jennings <2>
  • Douglas
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Douglas have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Douglas
    • Douglas is located in Putnam County
  • Allentown
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Allentown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allentown
    • Allentown is located in Allen County
  • Continue List   (14 more) ...
    • Lima
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Lima
      • Lima is located in Allen County
      • Population from the 2020 Census: 36,440 people
      • Jump to TripAdvisor's Tourism page for Lima <2>
    • Beaverdam
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdam
      • Beaverdam is located in Allen County
      • Population from the 2020 Census: 369 people
      • Jump to TripAdvisor's Tourism page for Beaverdam <2>
    • Avis
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Avis
      • Avis is located in Putnam County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Vaughnsville. See our List of 1890's Communities around Vaughnsville.

Newspapers Published in Vaughnsville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 104 newspapers that have been published in the area around Vaughnsville.

Although we're unaware of any newspapers that were published in the immediate area of Vaughnsville, there are papers which were published within 24 miles [38.6 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Vaughnsville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Vaughnsville:

Unfortunately, we don't know of a website for Vaughnsville. If you can help, please contact us through our Feedback Page.

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Vaughnsville, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Vaughnsville) to Point B.Our distance measurements begin at a specific point in Vaughnsville. The point we use is located at these GPS coordinates - Latitude: 40.8817, Longitude: -84.1505       In this case, the coordinates for Vaughnsville have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 30 Mar 2025