|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Upper Tauwa in the Atlas, the following communities of the 1890's would have been found near the current location of Upper Tauwa. The following communities are listed based on their distance, with the one closest to Upper Tauwa listed first.
- Ottawa
(Less than 2 miles to the west)
- Glandorf
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glandorf
- Glandorf is located in Putnam County
- Population from the 2020 Census: 1,030 people
- Jump to TripAdvisor's Tourism page for Glandorf <2>
- Pandora
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pandora
- Pandora is located in Putnam County
- Population from the 2020 Census: 1,101 people
- Gilboa
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Gilboa
- Gilboa is located in Putnam County
- Population from the 2020 Census: 173 people
- Columbus Grove
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus Grove
- Columbus Grove is located in Putnam County
- Population from the 2020 Census: 2,061 people
- Jump to TripAdvisor's Tourism page for Columbus Grove <2>
- Leipsic Junction
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Leipsic Junction
- Leipsic Junction is located in Putnam County
- Leipsic
(6 miles [9.7 km] to the north)
- West Leipsic
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for West Leipsic
- West Leipsic is located in Putnam County
- Population from the 2020 Census: 188 people
- Elm Center
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Elm Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elm Center
- Elm Center is located in Putnam County
- Avis
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avis
- Avis is located in Putnam County
- Miller City
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miller City
- Miller City is located in Putnam County
- Population from the 2020 Census: 138 people
- Jump to TripAdvisor's Tourism page for Miller City <2>
- Kalida
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kalida
- Kalida is located in Putnam County
- Population from the 2020 Census: 1,583 people
- Jump to TripAdvisor's Tourism page for Kalida <2>
- Moffitt ‑ Historic
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Moffitt. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Moffitt
- Moffitt is located in Hancock County
- Townwood
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Townwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Townwood
- Townwood is located in Putnam County
- Bluffton
(10 miles [16.1 km] to the southeast)
- Shawtown
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Shawtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shawtown
- Shawtown is located in Hancock County
- Belmore
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Belmore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmore
- Belmore is located in Putnam County
- Population from the 2020 Census: 143 people
- Vaughnsville
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Vaughnsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vaughnsville
- Vaughnsville is located in Putnam County
- Mount Cory
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Mount Cory
- Mount Cory is located in Hancock County
- Population from the 2020 Census: 195 people
- Benton Ridge
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Ridge
- Benton Ridge is located in Hancock County
- Population from the 2020 Census: 289 people
- Kieferville
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kieferville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kieferville
- Kieferville is located in Putnam County
- West Cairo
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Cairo
- West Cairo is located in Allen County
- Beaverdam
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaverdam
- Beaverdam is located in Allen County
- Population from the 2020 Census: 369 people
- Jump to TripAdvisor's Tourism page for Beaverdam <2>
- Rawson
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rawson
- Rawson is located in Hancock County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Rawson <2>
- Hector
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hector
- Hector is located in Putnam County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Upper Tauwa. If you can help, please contact us through our Feedback Page. The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Upper Tauwa, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|