|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Thacher in the Atlas, the following communities of the 1890's would have been found near the current location of Thacher. The following communities are listed based on their distance, with the one closest to Thacher listed first.
- Circleville
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Circleville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Circleville
- Circleville is located in Pickaway County
- Population from the 2020 Census: 14,158 people
- Jump to TripAdvisor's Tourism page for Circleville <3>
- Elmwood
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Elmwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elmwood
- Elmwood is located in Pickaway County
- Google driving directions:
- From your current location to Elmwood
- From Thacher to Elmwood
- Stoutsville
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Stoutsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoutsville
- Stoutsville is located in Fairfield County
- Population from the 2020 Census: 566 people
- Jump to TripAdvisor's Tourism page for Stoutsville <3>
- Tarlton
(5 miles [8 km] to the east)
- Kingston
(6 miles [9.7 km] to the south)
- Whisler
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Whisler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whisler
- Whisler is located in Pickaway County
- Yellowbud
(7 miles [11.3 km] to the southwest)
- Stringtown
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Pickaway County
- East Ringgold
(7 miles [11.3 km] to the north)
- Hallsville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Hallsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hallsville
- Hallsville is located in Ross County
- Drinkle
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Drinkle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drinkle
- Drinkle is located in Fairfield County
- Fox
(8 miles [12.9 km] to the northwest)
- Adelphi
(9 miles [14.5 km] to the southeast)
- Laurelville
(9 miles [14.5 km] to the southeast)
- Nebraska ‑ Historic
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Nebraska have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nebraska
- Nebraska is located in Pickaway County
- Amanda
(9 miles [14.5 km] to the northeast)
- Cedar Hill
(9 miles [14.5 km] to the northeast)
- Kinderhook
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Kinderhook have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kinderhook
- Kinderhook is located in Pickaway County
- Kinnikinnick
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Kinnikinnick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kinnikinnick
- Kinnikinnick is located in Ross County
- Walnut
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Walnut have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut
- Walnut is located in Pickaway County
- Andersonville
(11 miles [17.7 km] to the southwest)
- Ashville
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Ashville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashville
- Ashville is located in Pickaway County
- Population from the 2020 Census: 4,465 people
- Jump to TripAdvisor's Tourism page for Ashville <3>
- Clearport
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Clearport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearport
- Clearport is located in Fairfield County
- South Bloomfield
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for South Bloomfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Bloomfield
- South Bloomfield is located in Pickaway County
- Population from the 2020 Census: 1,977 people
- South Perry
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for South Perry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Perry
- South Perry is located in Hocking County
- Revenge ‑ Historic
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Revenge. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Revenge
- Revenge is located in Fairfield County
- Google driving directions:
- From your current location to Revenge
- From Thacher to Revenge
- Royalton
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Royalton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Royalton
- Royalton is located in Fairfield County
- Saint Paul
(12 miles [19.3 km] to the north)
- Williamsport
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Williamsport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsport
- Williamsport is located in Pickaway County
- Population from the 2020 Census: 1,085 people
- Jump to TripAdvisor's Tourism page for Williamsport <3>
- Woodlyn
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Woodlyn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlyn
- Woodlyn is located in Pickaway County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Thacher, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|