Census Data for Slater
As far as we can tell, Slater has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Slater, you might be interested in some nearby communities where we do:
- Uniopolis
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Uniopolis
- Uniopolis is located in Auglaize County
- The population in 2016 was estimated at 220 people. This represents a 0.9% decrease since 2010.The 2010 Census gave a population of 222 people.
- Jackson Center
(6 miles [9.7 km] to the south)
- Wapakoneta
(6 miles [9.7 km] to the northwest)
- Botkins
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Botkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botkins
- Botkins is located in Shelby County
- Jump to TripAdvisor's Tourism page for Botkins <1>
- Waynesfield
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Waynesfield
- Waynesfield is located in Auglaize County
- Lakeview
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeview
- Lakeview is located in Logan County
- Jump to TripAdvisor's Tourism page for Lakeview <1>
- Cridersville
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cridersville
- Cridersville is located in Auglaize County
- Jump to TripAdvisor's Tourism page for Cridersville <1>
- Anna
(10 miles [16.1 km] to the southwest)
- Russells Point
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Russells Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russells Point
- Russells Point is located in Logan County
- Jump to TripAdvisor's Tourism page for Russells Point <1>
- Buckland
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Buckland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckland
- Buckland is located in Auglaize County
- Fort Shawnee
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Fort Shawnee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Shawnee
- Fort Shawnee is located in Allen County
- The population in 2012 was estimated at 3,643 people. This represents a 2.23% decrease since 2010.The 2010 Census gave a population of 3,726 people.
- Kettlersville
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Kettlersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kettlersville
- Kettlersville is located in Shelby County
- Jump to TripAdvisor's Tourism page for Kettlersville <1>
- Continue List (260 more) ...
- New Knoxville
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for New Knoxville
- New Knoxville is located in Auglaize County
- Port Jefferson
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Port Jefferson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Jefferson
- Port Jefferson is located in Shelby County
- Jump to TripAdvisor's Tourism page for Port Jefferson <1>
- Harrod
(14 miles [22.5 km] to the northeast)
Auglaize County ...
Slater is located in Auglaize County<3>.
For more information, please visit our Census Page for Auglaize County.
Miscellaneous Information for Slater ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Auglaize County or the community of Slater:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Slater:
- GNIS ID for Slater: 1065335
- GNIS ID for Auglaize County: 1074019
- GNIS ID for State of Ohio: 1085497
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 39 (Ohio)
- County Code: 011 (Auglaize County)
- Place Code: 72680 (Slater)
- State & County Code: 39/011 (Ohio / Auglaize County)
- State & Place Code: 39/72680 (Ohio / Slater)
- Misc. Census Codes ...
- Slater is located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Slater.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Slater. If you can help, please contact us through our Feedback Page.
The official website for Auglaize County: www.auglaizecounty.org
The official website for State of Ohio: https://ohio.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | If you're interested in how the shape of Ohio's counties, including Auglaize, have changed over time, we recommend the Atlas of Historical County Boundaries. |