Welcome to Saint Clair ...

So far, we found very little information about Saint Clair. The little that we've found leads us believe that the community is historic.<1>

We've added Saint Clair to our Gazetteer with the hope that we can develop more information. If you can help us with Saint Clair, please Contact Us.

Saint Clair would have been located within present day Muskingum County<2>.

While we don't have a date for the founding of Saint Clair, you might get a feel for it by knowing that the earliest mention that we've found (so far) was in a book dated 1895.

A typical abbreviation for Saint Clair: St. Clair

While the community is gone, the present day location for Saint Clair is 850 feet [259 m] above sea level.<3>.

Time Zone: The area where Saint Clair was located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time

The Area Codes where Saint Clair was located: 740 & 220<4>

Communities Also Named Saint Clair ...

While we believe that this Saint Clair is located in Muskingum County, we know of another 2 Ohio communities named Saint Clair. Those communities are located in the following counties: Butler and Columbiana County.

Beyond Ohio, there are 27 communities that are also named Saint Clair - they are located in Alabama (2), Arkansas, Georgia, Kansas, Louisiana, Michigan, Minnesota (2), Missouri (2), Montana, Nebraska, Nevada, Ontario (3), Pennsylvania (4), Tennessee (2), Virginia and Washington.

For more information, see our Tidbits & Trivia Page for Saint Clair.

Communities near Saint Clair ...

We have created a list of 10 communities that are near Saint Clair.

Zanesville
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Zanesville
- Zanesville is located in Muskingum County
- Population from the 2020 Census: 25,193 people
- Jump to TripAdvisor's Tourism page for Zanesville <5>
Cambridge
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Cambridge
- Cambridge is located in Guernsey County
- Population from the 2020 Census: 10,323 people
- Jump to TripAdvisor's Tourism page for Cambridge <5>
Byesville
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Byesville have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byesville
- Byesville is located in Guernsey County
- Population from the 2020 Census: 2,345 people
- Jump to TripAdvisor's Tourism page for Byesville <5>
New Concord
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for New Concord have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Concord
- New Concord is located in Muskingum County
- Population from the 2020 Census: 2,165 people
- Jump to TripAdvisor's Tourism page for New Concord <5>
South Zanesville
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for South Zanesville have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Zanesville
- South Zanesville is located in Muskingum County
- Population from the 2020 Census: 2,095 people
McConnelsville
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for McConnelsville have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McConnelsville
- McConnelsville is located in Morgan County
- Population from the 2020 Census: 1,720 people
- Jump to TripAdvisor's Tourism page for McConnelsville <5>
Caldwell
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Caldwell
- Caldwell is located in Noble County
- Population from the 2020 Census: 1,639 people
- Jump to TripAdvisor's Tourism page for Caldwell <5>
Philo
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Philo have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philo
- Philo is located in Muskingum County
- Population from the 2020 Census: 728 people
- Jump to TripAdvisor's Tourism page for Philo <5>
Malta
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malta
- Malta is located in Morgan County
- Population from the 2020 Census: 631 people
- Jump to TripAdvisor's Tourism page for Malta <5>
Senecaville
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senecaville
- Senecaville is located in Guernsey County
- Population from the 2020 Census: 447 people
- Jump to TripAdvisor's Tourism page for Senecaville <5>

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Saint Clair. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Saint Clair.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Saint Clair. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Saint Clair.

We also have a detailed list of newspapers that have been published in the area around Saint Clair. See our Newspapers Page for Saint Clair.

Adding Saint Clair to Our Gazetteer ...

We originally found mention of Saint Clair in the GNIS. For more information, see the Referenced GNIS Codes section on our Miscellaneous Page.

From our notes, the earliest published mention we've found for Saint Clair was in the book titled Business Atlas and Shippers' Guide (1895).

We also found Saint Clair on a map titled George#&160;F. Cram Map (1901).

For more details, see References and Mentions for Saint Clair.

Off-the-Road Links ...

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Saint Clair, please let us know so that we can improve our accuracy.
<2>	If you're interested in how the shape of Ohio's counties, including Muskingum, have changed over time, we recommend the Atlas of Historical County Boundaries.
<3>	The elevation is an estimate for the area around Saint Clair - it will be higher in some places and lower in others.
<4>	When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 740 code has been Overlayed with the 220 area code. New phone numbers in the Saint Clair area will be assigned with one of these codes: 740 or 220. As a result, placing a call in the Saint Clair area will require 10-digit dialing (where you enter both the area code and then the phone number).
<5>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<6>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.