RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Auglaize County >> New Hampshire >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Ohio


The Commemorative Quarter for Ohio







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in New Hampshire, we use the following websites to find information relevant to New Hampshire and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for New Hampshire:
    • 40.556161, -83.952719
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on New Hampshire
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Communities Also Named New Hampshire ...

We found two communities that share the name New Hampshire.

There is one other community in Ohio which is also named New Hampshire.

Beyond Ohio, there is another community also named New Hampshire in the United States.

  • Communities Located In Ohio ...
    • Madison County
      • This community is historic<1> and although located in Madison County, we don't know where within the county.
      • For more information, please visit our profile page for the Madison County community of New Hampshire.
  • Communities Elsewhere In North America ...
    • Kansas
      • Butler County
      • We found mention of this community, but have little information.<2> For the information that we do have, please visit our profile page for the Kansas community of New Hampshire [Butler County].

Curious and Interesting Names Near New Hampshire ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Fryburg
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Fryburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fryburg
    • Fryburg is located in Auglaize County
  • Green Acres
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Green Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Green Acres
    • Green Acres is located in Auglaize County
  • Gutman
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gutman have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gutman
    • Gutman is located in Auglaize County
  • Harrod
    (10 miles [16.1 km] to the north)
  • Island View
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Island View have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Island View
    • Island View is located in Logan County
  • Jumbo
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Jumbo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jumbo
    • Jumbo is located in Hardin County
  • Jump
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Jump have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jump
    • Jump is located in Hardin County
  • Lakeview
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeview
    • Lakeview is located in Logan County
    • Population from the 2020 Census: 1,105 people
    • Jump to TripAdvisor's Tourism page for Lakeview <4>
  • Lewistown
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Lewistown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lewistown
    • Lewistown is located in Logan County
  • Orchard Island
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Orchard Island have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orchard Island
    • Orchard Island is located in Logan County
  • Quickstep
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Quickstep have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Quickstep
    • Quickstep is located in Hardin County
  • Roundhead
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Roundhead have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roundhead
    • Roundhead is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Roundhead <4>
  • Russells Point
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Russells Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Russells Point
    • Russells Point is located in Logan County
    • Population from the 2020 Census: 1,378 people
    • Jump to TripAdvisor's Tourism page for Russells Point <4>

How Far From New Hampshire to ...

We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as New Hampshire to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<5> beginning in New Hampshire and extending to:

  • Wapakoneta, which is the Seat of Auglaize County, lies 12 miles [19.3 km]<5> to the west. If you could walk a straight line from New Hampshire to Wapakoneta, with an average speed<6> of 2.2 miles [3.5 km] per hour, it would take five to six hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take nearly four hours.
  • Columbus, which is the State Capital of Ohio, lies 64 miles [103 km] to the southeast (SE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than an hour, a buggy would take about three full days and walking would take most of three days.
  • The White House (Washington, DC) is 384 miles [618 km] to the east southeast (ESE). Driving would take most of a day, a buggy would take 15 days and walking would take 22 days.
  • The shortest distance<7> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,105 miles [9,825 km] and it lies to the northeast (NE).<8>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,833 miles [10,996.6 km] and it lies to the northeast (NE).<9>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,710 miles [7,580 km] and it lies to the northeast (NE).<10>

Unfortunately, we don't know of a website for New Hampshire. If you can help, please contact us through our Feedback Page.

The official website for Auglaize County: www.auglaizecounty.org

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about New Hampshire, please let us know so that we can improve our accuracy.
<2>If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer as a placeholder. As we find more information about that community, it will be added to our Gazetteer.

Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Mile's to see Pete ... Mile's is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name.

Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time.

Also keep in mind that New Hampshire could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- New Hampshire) to Point B.Our distance measurements begin at a specific point in New Hampshire. The point we use is located at these GPS coordinates - Latitude: 40.5562, Longitude: -83.9527       In this case, the coordinates for New Hampshire have been provided by the Geographic Names Information System (GNIS).
<6>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<7>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from New Hampshire to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<8>The calculated bearing (or angle) to Jerusalem is 312.061 degrees.
<9>The calculated bearing (or angle) to Mecca is 308.434 degrees.
<10>The calculated bearing (or angle) to the Vatican is 307.20 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024