Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Morganville had a population of 53 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Morganville, with the one closest to Morganville listed first.
- Halls Valley ‑ Historic
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Halls Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Valley
- Halls Valley is located in Morgan County
- Ringgold
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Ringgold have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ringgold
- Ringgold is located in Morgan County
- Rosseau
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Rosseau have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosseau
- Rosseau is located in Morgan County
- Malta
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malta
- Malta is located in Morgan County
- Population from the 2020 Census: 631 people
- Jump to TripAdvisor's Tourism page for Malta <3>
- Portersville
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Portersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portersville
- Portersville is located in Perry County
- Triadelphia
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Triadelphia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Triadelphia
- Triadelphia is located in Morgan County
- McConnelsville
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for McConnelsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McConnelsville
- McConnelsville is located in Morgan County
- Population from the 2020 Census: 1,720 people
- Jump to TripAdvisor's Tourism page for McConnelsville <3>
- Chapel Hill ‑ Historic
(5 miles [8 km] to the west)
- Westland
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Westland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Westland
- Westland is located in Morgan County
- Google driving directions:
- From your current location to Westland
- From Morganville to Westland
- Pennsville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Pennsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pennsville
- Pennsville is located in Morgan County
- Sayre
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Sayre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sayre
- Sayre is located in Perry County
- Corning
(7 miles [11.3 km] to the west)
- Elliott Crossroads
(7 miles [11.3 km] to the south)
- Rokeby Lock
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Rokeby Lock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rokeby Lock
- Rokeby Lock is located in Morgan County
- Eagleport
(7 miles [11.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Eagleport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Eagleport
- Eagleport is located in Morgan County
- Google driving directions:
- From your current location to Eagleport
- From Morganville to Eagleport
- Rendville
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Rendville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rendville
- Rendville is located in Perry County
- Population from the 2020 Census: 36 people
- Hamburg ‑ Historic
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hamburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamburg
- Hamburg is located in Perry County
- Burr Oak
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Burr Oak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burr Oak
- Burr Oak is located in Athens County
- Mountville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Mountville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountville
- Mountville is located in Morgan County
- Deavertown
(8 miles [12.9 km] to the northwest)
- Durant
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Durant have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durant
- Durant is located in Morgan County
- Drakes
(9 miles [14.5 km] to the west)
- Bishopville
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Bishopville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bishopville
- Bishopville is located in Morgan County
- Todds
(9 miles [14.5 km] to the southeast)
- Hooksburg
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Hooksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hooksburg
- Hooksburg is located in Morgan County
- Neelysville
(9 miles [14.5 km] to the east)
- Rose Farm
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Rose Farm have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rose Farm
- Rose Farm is located in Morgan County
- Moxahala
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Moxahala have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moxahala
- Moxahala is located in Perry County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Morganville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |