Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Melbern had a population of 72 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Melbern, with the one closest to Melbern listed first.
- Williams Center
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Williams Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williams Center
- Williams Center is located in Williams County
- Edgerton
(5 miles [8 km] to the west)
- Farmer
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Farmer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmer
- Farmer is located in Defiance County
- Bryan
(5 miles [8 km] to the east)
- Blakeslee
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Blakeslee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blakeslee
- Blakeslee is located in Williams County
- Population from the 2020 Census: 91 people
- Jump to TripAdvisor's Tourism page for Blakeslee <3>
- Ney
(8 miles [12.9 km] to the southeast)
- Pulaski
(8 miles [12.9 km] to the northeast)
- Montpelier
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montpelier
- Montpelier is located in Williams County
- Population from the 2020 Census: 3,907 people
- Jump to TripAdvisor's Tourism page for Montpelier <3>
- Edon
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Edon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edon
- Edon is located in Williams County
- Population from the 2020 Census: 807 people
- Jump to TripAdvisor's Tourism page for Edon <3>
- Artic
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Artic have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Artic
- Artic is located in DeKalb County (IN)
- Cicero ‑ Historic
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Cicero have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cicero
- Cicero is located in Defiance County
- Butler
(11 miles [17.7 km] to the west)
- Moats
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Moats have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moats
- Moats is located in Defiance County
- Newville
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Newville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newville
- Newville is located in DeKalb County (IN)
- Stryker
(12 miles [19.3 km] to the east)
- Alvarado
(12 miles [19.3 km] to the northwest)
- Ainger
(12 miles [19.3 km] to the north)
- Hicksville
(13 miles [20.9 km] to the southwest)
- Sherwood
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood
- Sherwood is located in Defiance County
- Population from the 2020 Census: 803 people
- Jump to TripAdvisor's Tourism page for Sherwood <3>
- Evansport
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Evansport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evansport
- Evansport is located in Defiance County
- Jump to TripAdvisor's Tourism page for Evansport <3>
- West Unity
(13 miles [20.9 km] to the northeast)
- The Bend
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for The Bend have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Bend
- The Bend is located in Defiance County
- Cooney
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Cooney. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cooney
- Cooney is located in Williams County
- Google driving directions:
- From your current location to Cooney
- From Melbern to Cooney
- Kunkle
(14 miles [22.5 km] to the northeast)
- Metz
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Metz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Metz
- Metz is located in Steuben County (IN)
- Hamilton
(14 miles [22.5 km] to the west)
Off-the-Road Links ...
The official website for Williams County: www.co.williams.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Melbern, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |