|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Lapperell in the Atlas, the following communities of the 1890's would have been found near the current location of Lapperell. The following communities are listed based on their distance, with the one closest to Lapperell listed first.
- Newfain
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Newfain. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Newfain
- Newfain is located in Pike County
- Latham
(2 miles [3.2 km] to the southeast)
- Byington
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Byington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byington
- Byington is located in Pike County
- Morgantown
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Morgantown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgantown
- Morgantown is located in Pike County
- Cynthiana
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for Cynthiana
- Cynthiana is located in Pike County
- Sinking Spring
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for Sinking Spring
- Sinking Spring is located in Highland County
- Population from the 2020 Census: 131 people
- Poplar Grove
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Poplar Grove
- Poplar Grove is located in Pike County
- Arkoe
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Arkoe have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arkoe
- Arkoe is located in Pike County
- Bainbridge
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Bainbridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bainbridge
- Bainbridge is located in Ross County
- Population from the 2020 Census: 846 people
- Jump to TripAdvisor's Tourism page for Bainbridge <3>
- Idaho
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Idaho have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Idaho
- Idaho is located in Pike County
- Jump to TripAdvisor's Tourism page for Idaho <3>
- Barretts Mills
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Barretts Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Barretts Mills
- Barretts Mills is located in Highland County
- Carmel
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Carmel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carmel
- Carmel is located in Highland County
- Elm Grove ‑ Historic
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Elm Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elm Grove
- Elm Grove is located in Pike County
- Buchanan
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Buchanan have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buchanan
- Buchanan is located in Pike County
- Nipgen
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nipgen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Nipgen
- Nipgen is located in Ross County
- Dills
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Dills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dills
- Dills is located in Ross County
- Harris
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Harris have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris
- Harris is located in Ross County
- Storms
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Storms have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Storms
- Storms is located in Ross County
- Rainsboro
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Rainsboro have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rainsboro
- Rainsboro is located in Highland County
- Turkey
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Turkey. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Turkey
- Turkey is located in Highland County
- Humboldt
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Humboldt. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Humboldt
- Humboldt is located in Ross County
- Elmville
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Elmville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elmville
- Elmville is located in Highland County
- North Uniontown
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for North Uniontown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Uniontown
- North Uniontown is located in Highland County
- Locust Grove
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Locust Grove. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Locust Grove
- Locust Grove is located in Adams County
- Marshall
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Marshall
- Marshall is located in Highland County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lapperell, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|