Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Hills and Dales in the Atlas, the following communities of the 1890's would have been found near the current location of Hills and Dales. The following communities are listed based on their distance, with the one closest to Hills and Dales listed first.
- Canton
(3 miles [4.8 km] to the southeast)
- Marchand ‑ Historic
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Marchand have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marchand
- Marchand is located in Stark County
- Massillon
(4 miles [6.4 km] to the southwest)
- Gambrinus
(4 miles [6.4 km] to the south)
- McDonaldsville
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for McDonaldsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDonaldsville
- McDonaldsville is located in Stark County
- Crystal Springs
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Crystal Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crystal Springs
- Crystal Springs is located in Stark County
- Richville
(5 miles [8 km] to the south)
- Pauls ‑ Historic
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Pauls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pauls
- Pauls is located in Stark County
- Waco
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Waco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waco
- Waco is located in Stark County
- Cairo
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cairo
- Cairo is located in Stark County
- Aultman
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Aultman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aultman
- Aultman is located in Stark County
- Newman
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Newman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newman
- Newman is located in Stark County
- West Brookfield
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for West Brookfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Brookfield
- West Brookfield is located in Stark County
- North Industry
(7 miles [11.3 km] to the southeast)
- Oval City
(7 miles [11.3 km] to the northeast)
- Greentown
(7 miles [11.3 km] to the north)
- Comet
(7 miles [11.3 km] to the northwest)
- Pigeon Run
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Pigeon Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pigeon Run
- Pigeon Run is located in Stark County
- Navarre
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Navarre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Navarre
- Navarre is located in Stark County
- Population from the 2020 Census: 1,796 people
- Jump to TripAdvisor's Tourism page for Navarre <2>
- Canal Fulton
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Canal Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canal Fulton
- Canal Fulton is located in Stark County
- Population from the 2020 Census: 5,399 people
- Jump to TripAdvisor's Tourism page for Canal Fulton <2>
- Sippo
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sippo. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sippo
- Sippo is located in Stark County
- Google driving directions:
- From your current location to Sippo
- From Hills and Dales to Sippo
- Howenstine
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Howenstine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howenstine
- Howenstine is located in Stark County
- Louisville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Stark County
- Population from the 2020 Census: 9,378 people
- Jump to TripAdvisor's Tourism page for Louisville <2>
- North Lawrence
(9 miles [14.5 km] to the west)
- East Greenville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for East Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Greenville
- East Greenville is located in Stark County
- Marks ‑ Historic
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Marks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marks
- Marks is located in Stark County
- Myersville
(10 miles [16.1 km] to the north)
- Summit ‑ Historic
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Summit have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summit
- Summit is located in Stark County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Hills and Dales. If you can help, please contact us through our Feedback Page.
The official website for Stark County: www.co.stark.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hills and Dales, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |