|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Radar Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Radar Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Radar Cemetery. We've listed the following communities based on their distance, with the closest first.
- Van Buren
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <3>
- North Baltimore
(3 miles [4.8 km] to the northwest)
- Bairdstown
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Bairdstown
- Bairdstown is located in Wood County
- Population from the 2020 Census: 136 people
- Bloomdale
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomdale
- Bloomdale is located in Wood County
- Population from the 2020 Census: 682 people
- Jump to TripAdvisor's Tourism page for Bloomdale <3>
- Hammansburg
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hammansburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammansburg
- Hammansburg is located in Wood County
- Findlay
(6 miles [9.7 km] to the south)
- Eagleville
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Wood County
- McComb
(7 miles [11.3 km] to the west)
- Arcadia
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <3>
- Cygnet
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cygnet
- Cygnet is located in Wood County
- Population from the 2020 Census: 622 people
- Jump to TripAdvisor's Tourism page for Cygnet <3>
- Jerry City
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerry City
- Jerry City is located in Wood County
- Population from the 2020 Census: 437 people
- Hoytville
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Hoytville
- Hoytville is located in Wood County
- Population from the 2020 Census: 318 people
- Lewisburg ‑ Historic
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Hancock County
- Hancock
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hancock. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hancock
- Hancock is located in Hancock County
- Benton Ridge
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Ridge
- Benton Ridge is located in Hancock County
- Population from the 2020 Census: 289 people
- West Independence
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for West Independence
- West Independence is located in Hancock County
- West Millgrove
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Millgrove
- West Millgrove is located in Wood County
- Population from the 2020 Census: 176 people
- Six Points
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Six Points. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Six Points
- Six Points is located in Wood County
- Moffitt ‑ Historic
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Moffitt. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Moffitt
- Moffitt is located in Hancock County
- Fostoria
(12 miles [19.3 km] to the east)
- Rawson
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rawson
- Rawson is located in Hancock County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Rawson <3>
- Vanlue
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Vanlue
- Vanlue is located in Hancock County
- Population from the 2020 Census: 351 people
- Portage
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Portage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portage
- Portage is located in Wood County
- Population from the 2020 Census: 490 people
- Townwood
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Townwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Townwood
- Townwood is located in Putnam County
- Alvada
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Alvada
- Alvada is located in Seneca County
- Wayne
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wayne
- Wayne is located in Wood County
- Population from the 2020 Census: 925 people
- Jump to TripAdvisor's Tourism page for Wayne <3>
- Custar
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Custar
- Custar is located in Wood County
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Custar <3>
- Deshler
(14 miles [22.5 km] to the west)
Off-the-Road Links ...
The official website for Hancock County: www.co.hancock.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Radar Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.1314, Longitude: -83.6499 In this case, the coordinates for the Radar Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|