|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Longview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Longview Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Longview Cemetery (FG ID #41868). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Longview Cemetery. We've listed the following communities based on their distance, with the closest first.
- Bowerston
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Bowerston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowerston
- Bowerston is located in Harrison County
- Population from the 2020 Census: 378 people
- Jump to TripAdvisor's Tourism page for Bowerston <4>
- Leesville
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Leesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leesville
- Leesville is located in Carroll County
- Population from the 2020 Census: 143 people
- Conotton
(2 miles [3.2 km] to the southeast)
- Tappan
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tappan. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Tappan
- Tappan is located in Harrison County
- Google driving directions:
- From your current location to Tappan
- From the Longview Cemetery to Tappan
- Scio
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Scio have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scio
- Scio is located in Harrison County
- Population from the 2020 Census: 713 people
- Jump to TripAdvisor's Tourism page for Scio <4>
- Sherrodsville
(5 miles [8 km] to the northwest)
- Leavittsville
(5 miles [8 km] to the north)
- Feed Springs
(6 miles [9.7 km] to the southwest)
- Queensboro
(6 miles [9.7 km] to the north)
- Dennison
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Dennison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennison
- Dennison is located in Tuscarawas County
- Population from the 2020 Census: 2,599 people
- Jump to TripAdvisor's Tourism page for Dennison <4>
- Atwood Village
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Atwood Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atwood Village
- Atwood Village is located in Carroll County
- Uhrichsville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Uhrichsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Uhrichsville
- Uhrichsville is located in Tuscarawas County
- Population from the 2020 Census: 5,298 people
- Jump to TripAdvisor's Tourism page for Uhrichsville <4>
- Deersville
(8 miles [12.9 km] to the south)
- Dellroy
(8 miles [12.9 km] to the north)
- Roswell
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Roswell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roswell
- Roswell is located in Tuscarawas County
- Population from the 2020 Census: 212 people
- Valleyview
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Valleyview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valleyview
- Valleyview is located in Carroll County
- Barnhill
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Barnhill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnhill
- Barnhill is located in Tuscarawas County
- Population from the 2020 Census: 390 people
- Midvale
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Midvale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midvale
- Midvale is located in Tuscarawas County
- Population from the 2020 Census: 742 people
- Three Legs Town ‑ Historic
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Three Legs Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Legs Town
- Three Legs Town is located in Tuscarawas County
- Stillwater
(10 miles [16.1 km] to the southwest)
- Jewett
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Jewett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jewett
- Jewett is located in Harrison County
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Jewett <4>
- Tuscarawas
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Tuscarawas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tuscarawas
- Tuscarawas is located in Tuscarawas County
- Population from the 2020 Census: 1,044 people
- Carrollton
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Carrollton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrollton
- Carrollton is located in Carroll County
- Population from the 2020 Census: 3,017 people
- Jump to TripAdvisor's Tourism page for Carrollton <4>
- Germano
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Germano. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Germano
- Germano is located in Harrison County
- Google driving directions:
- From your current location to Germano
- From the Longview Cemetery to Germano
- Gnadenhutten
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Gnadenhutten have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gnadenhutten
- Gnadenhutten is located in Tuscarawas County
- Population from the 2020 Census: 1,251 people
- Jump to TripAdvisor's Tourism page for Gnadenhutten <4>
- Somerdale
(13 miles [20.9 km] to the northwest)
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Longview Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.4324, Longitude: -81.1863 |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|