Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Knepper Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Knepper Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Knepper Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Benton Ridge
(Less than 2 miles to the southeast)- Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Ridge
- Benton Ridge is located in Hancock County
- Population from the 2020 Census: 289 people
- Moffitt ‑ Historic
(Less than 2 miles to the west) - Lewisburg ‑ Historic
(2 miles [3.2 km] to the northeast) - Rawson
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rawson
- Rawson is located in Hancock County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Rawson <4>
- Mount Cory
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Mount Cory have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Cory
- Mount Cory is located in Hancock County
- Population from the 2020 Census: 195 people
- Gilboa
(5 miles [8 km] to the west) - McComb
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McComb
- McComb is located in Hancock County
- Population from the 2020 Census: 1,632 people
- Jump to TripAdvisor's Tourism page for McComb <4>
- Cannonsburg ‑ Historic
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Cannonsburg
- Cannonsburg is located in Hancock County
- Townwood
(7 miles [11.3 km] to the northwest) - Pandora
(8 miles [12.9 km] to the southwest) - Findlay
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Findlay
- Findlay is located in Hancock County
- Population from the 2020 Census: 40,832 people
- Jump to TripAdvisor's Tourism page for Findlay <4>
- Hancock
(9 miles [14.5 km] to the north) - Bluffton
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Bluffton
- Bluffton is located in Allen County
- Population from the 2020 Census: 4,030 people
- Jump to TripAdvisor's Tourism page for Bluffton <4>
- Jenera
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Jenera
- Jenera is located in Hancock County
- Population from the 2020 Census: 213 people
- Jump to TripAdvisor's Tourism page for Jenera <4>
- Leipsic Junction
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Leipsic Junction
- Leipsic Junction is located in Putnam County
- Leipsic
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Leipsic
- Leipsic is located in Putnam County
- Population from the 2020 Census: 2,016 people
- Jump to TripAdvisor's Tourism page for Leipsic <4>
- Arlington
(11 miles [17.7 km] to the southeast)- Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arlington
- Arlington is located in Hancock County
- Population from the 2020 Census: 1,431 people
- Jump to TripAdvisor's Tourism page for Arlington <4>
- Belmore
(11 miles [17.7 km] to the northwest) - West Leipsic
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for West Leipsic
- West Leipsic is located in Putnam County
- Population from the 2020 Census: 188 people
- Van Buren
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <4>
- Hoytville
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Hoytville
- Hoytville is located in Wood County
- Population from the 2020 Census: 318 people
- Ottawa
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Ottawa
- Ottawa is located in Putnam County
- Population from the 2020 Census: 4,323 people
- Jump to TripAdvisor's Tourism page for Ottawa <4>
- New Stark
(13 miles [20.9 km] to the south) - North Baltimore
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for North Baltimore
- North Baltimore is located in Wood County
- Population from the 2020 Census: 3,556 people
- Jump to TripAdvisor's Tourism page for North Baltimore <4>
- Glandorf
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glandorf
- Glandorf is located in Putnam County
- Population from the 2020 Census: 1,030 people
- Jump to TripAdvisor's Tourism page for Glandorf <4>
Off-the-Road Links ...
The official website for Hancock County: www.co.hancock.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Knepper Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.0151, Longitude: -83.8135 In this case, the coordinates for the Knepper Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |