|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hough Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hough Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hough Cemetery. We've listed the following communities based on their distance, with the closest first.
- North Baltimore
(Less than 2 miles to the south)
- Hammansburg
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hammansburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hammansburg
- Hammansburg is located in Wood County
- Van Buren
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <2>
- Bairdstown
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Bairdstown
- Bairdstown is located in Wood County
- Population from the 2020 Census: 136 people
- Cygnet
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cygnet
- Cygnet is located in Wood County
- Population from the 2020 Census: 622 people
- Jump to TripAdvisor's Tourism page for Cygnet <2>
- Jerry City
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerry City
- Jerry City is located in Wood County
- Population from the 2020 Census: 437 people
- Hoytville
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Hoytville
- Hoytville is located in Wood County
- Population from the 2020 Census: 318 people
- Bloomdale
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomdale
- Bloomdale is located in Wood County
- Population from the 2020 Census: 682 people
- Jump to TripAdvisor's Tourism page for Bloomdale <2>
- Eagleville
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Wood County
- McComb
(8 miles [12.9 km] to the southwest)
- Hancock
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hancock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hancock
- Hancock is located in Hancock County
- Six Points
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Six Points. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Six Points
- Six Points is located in Wood County
- Portage
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Portage have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portage
- Portage is located in Wood County
- Population from the 2020 Census: 490 people
- Findlay
(10 miles [16.1 km] to the south)
- Arcadia
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- West Millgrove
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Millgrove
- West Millgrove is located in Wood County
- Population from the 2020 Census: 176 people
- Milton Center
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Milton Center
- Milton Center is located in Wood County
- Population from the 2020 Census: 146 people
- Custar
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Custar
- Custar is located in Wood County
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Custar <2>
- Lewisburg ‑ Historic
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Hancock County
- Deshler
(11 miles [17.7 km] to the west)
- Townwood
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Townwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Townwood
- Townwood is located in Putnam County
- Weston
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weston
- Weston is located in Wood County
- Population from the 2020 Census: 1,657 people
- Jump to TripAdvisor's Tourism page for Weston <2>
- Bowling Green
(12 miles [19.3 km] to the north)
- Belmore
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Belmore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmore
- Belmore is located in Putnam County
- Population from the 2020 Census: 143 people
- Wayne
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wayne
- Wayne is located in Wood County
- Population from the 2020 Census: 925 people
- Jump to TripAdvisor's Tourism page for Wayne <2>
- The Village
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for The Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Village
- The Village is located in Wood County
Off-the-Road Links ...
The official website for Wood County: www.co.wood.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hough Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.1903, Longitude: -83.6810 In this case, the coordinates for the Hough Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|