|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hamlin Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hamlin Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hamlin Cemetery. We've listed the following communities based on their distance, with the closest first.
- Arcadia
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <3>
- Van Buren
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <3>
- Findlay
(5 miles [8 km] to the southwest)
- Bairdstown
(5 miles [8 km] to the north)
- Bloomdale
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomdale
- Bloomdale is located in Wood County
- Population from the 2020 Census: 682 people
- Jump to TripAdvisor's Tourism page for Bloomdale <3>
- Eagleville
(6 miles [9.7 km] to the north)
- West Independence
(7 miles [11.3 km] to the east)
- North Baltimore
(7 miles [11.3 km] to the northwest)
- Vanlue
(9 miles [14.5 km] to the southeast)
- Alvada
(9 miles [14.5 km] to the east)
- Fostoria
(9 miles [14.5 km] to the northeast)
- Cygnet
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cygnet
- Cygnet is located in Wood County
- Population from the 2020 Census: 622 people
- Jump to TripAdvisor's Tourism page for Cygnet <3>
- West Millgrove
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Millgrove
- West Millgrove is located in Wood County
- Population from the 2020 Census: 176 people
- Hammansburg
(10 miles [16.1 km] to the northwest)
- Jerry City
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerry City
- Jerry City is located in Wood County
- Population from the 2020 Census: 437 people
- Lewisburg ‑ Historic
(11 miles [17.7 km] to the west)
- McComb
(11 miles [17.7 km] to the west)
- Six Points
(12 miles [19.3 km] to the north)
- Hoytville
(12 miles [19.3 km] to the northwest)
- Benton Ridge
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Ridge
- Benton Ridge is located in Hancock County
- Population from the 2020 Census: 289 people
- Mount Blanchard
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Blanchard
- Mount Blanchard is located in Hancock County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Mount Blanchard <3>
- New Riegel
(13 miles [20.9 km] to the east)
- Rawson
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rawson
- Rawson is located in Hancock County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Rawson <3>
- Arlington
(14 miles [22.5 km] to the south)
- Carey
(14 miles [22.5 km] to the southeast)
- Adrian
(14 miles [22.5 km] to the southeast)
- Risingsun
(14 miles [22.5 km] to the northeast)
- Wayne
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wayne
- Wayne is located in Wood County
- Population from the 2020 Census: 925 people
- Jump to TripAdvisor's Tourism page for Wayne <3>
Off-the-Road Links ...
The official website for Hancock County: www.co.hancock.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hamlin Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.0983, Longitude: -83.5734 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|