|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Crosby Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Crosby Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Crosby Cemetery. We've listed the following communities based on their distance, with the closest first.
- Limerick
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for Limerick
- Limerick is located in Jackson County
- Coalton
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Coalton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coalton
- Coalton is located in Jackson County
- Population from the 2020 Census: 473 people
- Ray
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Ray
- Ray is located in Jackson County
- Mount Sinai
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Mount Sinai
- Mount Sinai is located in Pike County
- Jackson
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jackson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Jackson County
- Population from the 2020 Census: 6,240 people
- Jump to TripAdvisor's Tourism page for Jackson <4>
- Petrea
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Petrea. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Petrea
- Petrea is located in Jackson County
- Altoona
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Altoona
- Altoona is located in Jackson County
- Glen Roy
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Glen Roy
- Glen Roy is located in Jackson County
- Richland
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Richland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Richland
- Richland is located in Vinton County
- Glade
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Glade
- Glade is located in Jackson County
- Wellston
(8 miles [12.9 km] to the east)
- Richmond Dale
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Richmond Dale
- Richmond Dale is located in Ross County
- Beaver
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Beaver have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver
- Beaver is located in Pike County
- Population from the 2020 Census: 429 people
- Jump to TripAdvisor's Tourism page for Beaver <4>
- Hamden
(9 miles [14.5 km] to the east)
- Pattonsville
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Pattonsville
- Pattonsville is located in Jackson County
- Dundas
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Dundas
- Dundas is located in Vinton County
- Schooley
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Schooley
- Schooley is located in Ross County
- Schooley has also been known as:
- Schooley Station
- Greggs
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Greggs
- Greggs is located in Pike County
- Zahn's Corners
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Zahn's Corners
- Zahn's Corners is located in Pike County
- Zahn's Corners has also been known as:
- Zann's Corners
- Banner ‑ Historic
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Banner
- Banner is located in Jackson County
- McArthur
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for McArthur have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McArthur
- McArthur is located in Vinton County
- Population from the 2020 Census: 1,620 people
- Jump to TripAdvisor's Tourism page for McArthur <4>
- Bristol Village
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Bristol Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol Village
- Bristol Village is located in Pike County
- Oreton
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Oreton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Oreton
- Oreton is located in Vinton County
- Deadman Crossing
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Deadman Crossing
- Deadman Crossing is located in Ross County
- Alma
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Alma
- Alma is located in Ross County
- Waverly
(15 miles [24.1 km] to the west)
- Waverly City
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Waverly City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waverly City
- Waverly City is located in Pike County
- Estimated population in 2011: 4,395 people
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Crosby Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.1309, Longitude: -82.6979 In this case, the coordinates for the Crosby Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|