|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Boynton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Boynton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Boynton Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Stryker
(2 miles [3.2 km] to the northeast)
- Pulaski
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Williams County
- Bryan
(5 miles [8 km] to the west)
- Ney
(7 miles [11.3 km] to the southwest)
- Archbold
(7 miles [11.3 km] to the northeast)
- West Unity
(7 miles [11.3 km] to the north)
- Burlington
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Burlington
- Burlington is located in Fulton County
- Holiday City
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Holiday City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holiday City
- Holiday City is located in Williams County
- Population from the 2020 Census: 47 people
- Montpelier
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montpelier
- Montpelier is located in Williams County
- Population from the 2020 Census: 3,907 people
- Jump to TripAdvisor's Tourism page for Montpelier <2>
- Kunkle
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Kunkle
- Kunkle is located in Williams County
- Pettisville
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Pettisville
- Pettisville is located in Fulton County
- Eckley ‑ Historic
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Eckley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eckley
- Eckley is located in Fulton County
- Eckley has also been known as:
- Eckley Station
- Melbern
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Melbern
- Melbern is located in Williams County
- Alvordton
(12 miles [19.3 km] to the north)
- Williamstown
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Defiance County
- Jewell
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Jewell
- Jewell is located in Defiance County
- Sherwood
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood
- Sherwood is located in Defiance County
- Population from the 2020 Census: 803 people
- Jump to TripAdvisor's Tourism page for Sherwood <2>
- Defiance
(14 miles [22.5 km] to the south)
- Okolona
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Okolona
- Okolona is located in Henry County
- Okolona has also been known as:
- Okalona
- Pioneer
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Pioneer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pioneer
- Pioneer is located in Williams County
- Population from the 2020 Census: 1,396 people
- Jump to TripAdvisor's Tourism page for Pioneer <2>
- Fayette
(14 miles [22.5 km] to the northeast)
- Jim Town
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Jim Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jim Town
- Jim Town is located in Williams County
- Thelma ‑ Historic
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Thelma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thelma
- Thelma is located in Fulton County
- Blakeslee
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Blakeslee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blakeslee
- Blakeslee is located in Williams County
- Population from the 2020 Census: 91 people
- Jump to TripAdvisor's Tourism page for Blakeslee <2>
- Denmark ‑ Historic
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Denmark have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denmark
- Denmark is located in Williams County
Off-the-Road Links ...
The official website for Williams County: www.co.williams.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Boynton Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.4784, Longitude: -84.4388 In this case, the coordinates for the Boynton Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|