Miscellaneous Information
Various Identification Codes ...
GNIS Codes ...
The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, chose a new name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).
The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).
A unique and permanent identification number has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:
GNIS ID for Beverly: 2398115
GNIS ID for Washington County: 1074095
GNIS ID for Ohio: 1085497
FIPS Codes ...
In a past effort, various federal agencies created a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.
The following FIPS codes apply to Beverly:
| Place (Community) Code: | 06222 |
| State Code: | 39 (Ohio) |
| County Code: | 167 (Washington County) |
Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:
| State/Place Code: | 39/06222 |
| State/County Code: | 39/167 |
As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:
| FIPS Code | translates to | GNIS Code | |
| State of Ohio: | 39 | 1085497 | |
| Washington County: | 39/167 | 1074095 | |
| Beverly: | 39/06222 | 2398115 |
GPS Location - GNIS vs Census ...
An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of Beverly, it is a point within Beverly that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.
For Beverly, the GNIS GPS location is given as:
Lat: 39° 32' 59" (or 39.55°)
Lon: -81° 38' 10" (or -81.64°)
Determined by its statistical needs, the Census Bureau has defined a sampling area for Beverly - this area also contains a map point. As with the GNIS code, the location of the Census point should be considered as being arbitrary within the sampling area.
For Beverly, the Census 2010 GPS location is given as:
Lat: 39° 32' 59" (or 39.55°)
Lon: -81° 38' 9" (or -81.64°)
The map point defined by the Census Bureau lies 100.5 feet to the east<1> of the point given by the GNIS (see above).
You might note that the GPS location given for the 2010 Census is different than the location that was specified by the 2000 Census:
Lat: 39° 32' 55" (or 39.55°)
Lon: -81° 38' 9" (or -81.64°)
The GPS location given for the 2000 Census lies 433 feet to the south<2> of the point given by the 2010 Census.
Regional Codes ...
For statistical purposes, the US Census Bureau has divided the country into four Regions. Beverly is located in Region #2 (the Midwest Region).
In turn, the US Census Bureau has further divided each Region into Divisions. Beverly is located in Division #3 (the East North-Central Division).
The Office of Management and Budget (OMB) has created ten Federal Regions. Beverly is located in Region V (Region 5).
The Federal Emergency Management Agency (FEMA) has created ten Management Regions. Beverly is located in Region V (Region 5).
Referenced GNIS Records ...
GNIS ID #1048521 (Name of Record: Beverly)
Class: populated place
A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.
A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.
County: Washington
Map Name: Beverly
Lat: 39.5478509 Lon: -81.6395732
Elev: 201 ft.
GNIS ID #2398115 (Name of Record: Village of Beverly)
Class: civil
A political division formed for administrative purposes (such as a borough, county, incorporated place, parish, town or township).
A 'civil' record may have a corresponding 'census' or 'populated place' record. The information contained in the 'civil' record applies only to the class and should not be confused with either the 'census' and 'populated place' classes.
County: Washington
Map Name: Beverly
Lat: 39.5499845 Lon: -81.636201
Elev: 218 ft.
Referenced FIPS Records ...
FIPS Code: 39/06222 (Place Name: Beverly)
County: Washington (FIPS State/County: 39/167)
Class: C1
Identifies an incorporated place (ie- Beverly) that does not serve as a primary county division - or in other words, it is included in and is part of a primary county division (ie- Washington County).
GSA Code: 780
MRF Code: 405
MSA Code: 6020
Off-the-Road Links ...
Unfortunately, we don't know of a website for Beverly. If you can help, please contact us through our Feedback Page.
The official website for Washington County: www.co.washington.oh.us/
The official website for State of Ohio: https://ohio.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
The official website of the U.S. Census Bureau
The official website of the U.S. Office of Management and Budget (OMB)
The official website of the U.S. Federal Emergency Management Agency (FEMA)