RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Wood County >> Bassett >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Ohio


The Commemorative Quarter for Ohio







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Bassett in the Atlas, the following communities of the 1890's would have been found near the current location of Bassett. The following communities are listed based on their distance, with the one closest to Bassett listed first.

  • Oil Center ‑ Historic
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Oil Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oil Center
    • Oil Center is located in Wood County
  • Hammansburg
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for Hammansburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hammansburg
    • Hammansburg is located in Wood County
  • North Baltimore
    (2 miles [3.2 km] to the south)
  • Galatea
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Galatea have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galatea
    • Galatea is located in Wood County
  • Cygnet
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cygnet
    • Cygnet is located in Wood County
    • Population from the 2020 Census: 622 people
    • Jump to TripAdvisor's Tourism page for Cygnet <3>
  • Trombley
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Trombley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trombley
    • Trombley is located in Wood County
  • Bays
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Bays have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bays
    • Bays is located in Wood County
  • Bairdstown
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bairdstown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bairdstown
    • Bairdstown is located in Wood County
    • Population from the 2020 Census: 136 people
  • Jerry City
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jerry City
    • Jerry City is located in Wood County
    • Population from the 2020 Census: 437 people
  • Mungen
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Mungen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mungen
    • Mungen is located in Wood County
  • Wingston
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wingston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wingston
    • Wingston is located in Wood County
  • Hoytville
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Hoytville
    • Hoytville is located in Wood County
    • Population from the 2020 Census: 318 people
  • Digby
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Digby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Digby
    • Digby is located in Wood County
  • Van Buren
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Van Buren
    • Van Buren is located in Hancock County
    • Population from the 2020 Census: 538 people
    • Jump to TripAdvisor's Tourism page for Van Buren <3>
  • Rudolph
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Rudolph have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rudolph
    • Rudolph is located in Wood County
  • Haney ‑ Historic
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Haney have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haney
    • Haney is located in Wood County
  • Portage Center
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Portage Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Portage Center
    • Portage Center is located in Hancock County
  • Bloomdale
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bloomdale
    • Bloomdale is located in Wood County
    • Population from the 2020 Census: 682 people
    • Jump to TripAdvisor's Tourism page for Bloomdale <3>
  • Mermill
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Mermill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mermill
    • Mermill is located in Wood County
  • Mortimer
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Mortimer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mortimer
    • Mortimer is located in Hancock County
  • Six Points
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Six Points have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Six Points
    • Six Points is located in Wood County
  • Portage
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Portage have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Portage
    • Portage is located in Wood County
    • Population from the 2020 Census: 490 people
  • Wineland ‑ Historic
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wineland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wineland
    • Wineland is located in Hancock County
  • Deweyville
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Deweyville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deweyville
    • Deweyville is located in Hancock County
  • McComb
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McComb
    • McComb is located in Hancock County
    • Population from the 2020 Census: 1,632 people
    • Jump to TripAdvisor's Tourism page for McComb <3>
  • Chase
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Chase have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chase
    • Chase is located in Hancock County
  • West Millgrove
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Millgrove
    • West Millgrove is located in Wood County
    • Population from the 2020 Census: 176 people

Unfortunately, we don't know of an official website for Bassett. If you can help, please contact us through our Feedback Page.

The official website for Wood County: www.co.wood.oh.us/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bassett, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024