Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Small Corners in the Atlas, the following communities of the 1890's would have been found near the current location of Small Corners. The following communities are listed based on their distance, with the one closest to Small Corners listed first.
- Oriskany Falls
(3 miles [4.8 km] to the southwest)
- Waterville
(3 miles [4.8 km] to the southeast)
- Marshall
(4 miles [6.4 km] to the east)
- Marshall is located in Oneida County
- Jump to our Gazetteer entry for Marshall
- Knoxboro
(4 miles [6.4 km] to the west)
- Augusta
(4 miles [6.4 km] to the west)
- Augusta is located in Oneida County
- Jump to our Gazetteer entry for Augusta
- Sangerfield
(5 miles [8 km] to the southeast)
- Paris Station
(5 miles [8 km] to the east)
- Paris Station is located in Oneida County
- Jump to our Gazetteer entry for Paris Station
- Paris
(5 miles [8 km] to the east)
- Paris is located in Oneida County
- Jump to our Gazetteer entry for Paris
- Clinton
(5 miles [8 km] to the northeast)
- Solsville
(6 miles [9.7 km] to the southwest)
- Kirkland
(6 miles [9.7 km] to the north)
- Kirkland is located in Oneida County
- Jump to our Gazetteer entry for Kirkland
- Vernon Center
(6 miles [9.7 km] to the northwest)
- Lairdsville
(6 miles [9.7 km] to the north)
- Lairdsville is located in Oneida County
- Jump to our Gazetteer entry for Lairdsville
- Madison
(7 miles [11.3 km] to the southwest)
- Stockwell
(7 miles [11.3 km] to the south)
- Stockwell is located in Oneida County
- Jump to our Gazetteer entry for Stockwell
- Hecla
(8 miles [12.9 km] to the north)
- Hecla is located in Oneida County
- Jump to our Gazetteer entry for Hecla
- Cassville
(8 miles [12.9 km] to the east)
- Clayville
(8 miles [12.9 km] to the east)
- Sauquoit
(8 miles [12.9 km] to the east)
- Chadwicks
(8 miles [12.9 km] to the northeast)
- Washington Mills
(8 miles [12.9 km] to the northeast)
- Munnsville
(8 miles [12.9 km] to the west)
- Pratts
(9 miles [14.5 km] to the southwest)
- Pratts is located in Madison County
- Jump to our Gazetteer entry for Pratts
- Bouckville
(9 miles [14.5 km] to the southwest)
- North Brookfield
(9 miles [14.5 km] to the south)
- North Brookfield is located in Madison County
- Jump to our Gazetteer entry for North Brookfield
- North Bridgewater
(9 miles [14.5 km] to the southeast)
- North Bridgewater is located in Oneida County
- Jump to our Gazetteer entry for North Bridgewater
- New Hartford
(9 miles [14.5 km] to the northeast)
- New Hartford is located in Oneida County
- Jump to our Gazetteer entry for New Hartford
- Population from the 2020 Census: 1,824 people
- Walesville
(9 miles [14.5 km] to the north)
- Walesville is located in Oneida County
- Jump to our Gazetteer entry for Walesville
- Westmoreland
(9 miles [14.5 km] to the north)
- Vernon
(9 miles [14.5 km] to the northwest)
- Valley Mills
(9 miles [14.5 km] to the west)
- Valley Mills is located in Madison County
- Jump to our Gazetteer entry for Valley Mills
- Stockbridge
(9 miles [14.5 km] to the west)
- Stockbridge is located in Madison County
- Jump to our Gazetteer entry for Stockbridge
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Small Corners, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |