Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Seneca Mills had railroad service and no post office.
The following communities are listed based on their distance from Seneca Mills, with the one closest to Seneca Mills listed first.
- Mays Mills
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for Mays Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mays Mills
- Mays Mills is located in Yates County
- Milo Mills
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Milo Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milo Mills
- Milo Mills is located in Yates County
- Penn Yan
(2 miles [3.2 km] to the west)
- Second Milo
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Second Milo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Second Milo
- Second Milo is located in Yates County
- Dresden
(3 miles [4.8 km] to the northeast)
- Benton
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Benton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton
- Benton is located in Yates County
- Benton Center
(4 miles [6.4 km] to the northwest)
- Bluff Point
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Bluff Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Point
- Bluff Point is located in Yates County
- Jump to TripAdvisor's Tourism page for Bluff Point <3>
- Himrod
(5 miles [8 km] to the southeast)
- Angus
(5 miles [8 km] to the north)
- Bellona
(6 miles [9.7 km] to the north)
- Willard
(7 miles [11.3 km] to the east)
- Branchport
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Branchport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchport
- Branchport is located in Yates County
- Jump to TripAdvisor's Tourism page for Branchport <3>
- Crosby
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Crosby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crosby
- Crosby is located in Yates County
- Barrington
(8 miles [12.9 km] to the south)
- Kendaia
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Kendaia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kendaia
- Kendaia is located in Seneca County
- Voak
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Voak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Voak
- Voak is located in Yates County
- Friend
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Friend have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friend
- Friend is located in Yates County
- Dundee
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Dundee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dundee
- Dundee is located in Yates County
- Population from the 2020 Census: 1,608 people
- Jump to TripAdvisor's Tourism page for Dundee <3>
- Hall
(9 miles [14.5 km] to the north)
- Starkey
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Starkey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Starkey
- Starkey is located in Yates County
- Lodi
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lodi
- Lodi is located in Seneca County
- Population from the 2020 Census: 287 people
- Jump to TripAdvisor's Tourism page for Lodi <3>
- Ovid
(9 miles [14.5 km] to the east)
- Billsboro
(9 miles [14.5 km] to the north)
- Romulus
(10 miles [16.1 km] to the northeast)
- Potter
(10 miles [16.1 km] to the west)
Off-the-Road Links ...
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Seneca Mills, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |