|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Ruby in the Atlas, the following communities of the 1890's would have been found near the current location of Ruby. The following communities are listed based on their distance, with the one closest to Ruby listed first.
- Sawkill
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Sawkill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sawkill
- Sawkill is located in Ulster County
- Google driving directions:
- From your current location to Sawkill
- From Ruby to Sawkill
- High Woods
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for High Woods. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for High Woods
- High Woods is located in Ulster County
- Google driving directions:
- From your current location to High Woods
- From Ruby to High Woods
- Mount Marion
(2 miles [3.2 km] to the northeast)
- Glasco
(3 miles [4.8 km] to the northeast)
- Zena
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Zena. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Zena
- Zena is located in Ulster County
- Google driving directions:
- From your current location to Zena
- From Ruby to Zena
- West Hurley
(4 miles [6.4 km] to the west)
- Stony Hollow
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Stony Hollow. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stony Hollow
- Stony Hollow is located in Ulster County
- Google driving directions:
- From your current location to Stony Hollow
- From Ruby to Stony Hollow
- Barrytown
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Barrytown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barrytown
- Barrytown is located in Dutchess County
- Jump to TripAdvisor's Tourism page for Barrytown <3>
- Daisy
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Daisy. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Daisy
- Daisy is located in Ulster County
- Google driving directions:
- From your current location to Daisy
- From Ruby to Daisy
- East Kingston
(5 miles [8 km] to the southeast)
- Tivoli
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Tivoli have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tivoli
- Tivoli is located in Dutchess County
- Population from the 2020 Census: 1,076 people
- Jump to TripAdvisor's Tourism page for Tivoli <3>
- Saugerties
(5 miles [8 km] to the northeast)
- Woodstock
(5 miles [8 km] to the west)
- West Saugerties
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for West Saugerties have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Saugerties
- West Saugerties is located in Ulster County
- Hurley
(6 miles [9.7 km] to the south)
- Kingston
(6 miles [9.7 km] to the south)
- Malden
(6 miles [9.7 km] to the northeast)
- Katsbaan
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Katsbaan have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Katsbaan
- Katsbaan is located in Ulster County
- Glenford
(6 miles [9.7 km] to the west)
- Wilbur
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Wilbur have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilbur
- Wilbur is located in Ulster County
- Connelly
(7 miles [11.3 km] to the south)
- Rhinecliff
(7 miles [11.3 km] to the southeast)
- Red Hook
(7 miles [11.3 km] to the east)
- Quarryville
(7 miles [11.3 km] to the north)
- Bearsville
(7 miles [11.3 km] to the west)
Off-the-Road Links ...
The official website for Ulster County: www.co.ulster.ny.us/ The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ruby, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|