RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New York >> Washington County >> Pattens Mills >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
New York


The Commemorative Quarter for New York







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Pattens Mills, we use the following websites to find information relevant to Pattens Mills and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Pattens Mills:
    • 43.382849, -73.604004
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Pattens Mills
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Pattens Mills ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Diamond Point
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Diamond Point have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Diamond Point
    • Diamond Point is located in Warren County
    • Jump to TripAdvisor's Tourism page for Diamond Point <2>
  • French Mountain
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for French Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for French Mountain
    • French Mountain is located in Warren County
  • Glens Falls
    (5 miles [8 km] to the south)
  • Kingsbury
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for Kingsbury
    • Kingsbury is located in Washington County
  • Lake George
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lake George have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake George
    • Lake George is located in Warren County
    • Population from the 2020 Census: 918 people
    • Jump to TripAdvisor's Tourism page for Lake George <2>
  • Lake Sunnyside
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Lake Sunnyside have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Sunnyside
    • Lake Sunnyside is located in Warren County
  • Paradise Beach
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Paradise Beach have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Paradise Beach
    • Paradise Beach is located in Warren County
  • Queensbury
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Queensbury have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Queensbury
    • Queensbury is located in Warren County
    • Jump to TripAdvisor's Tourism page for Queensbury <2>
  • Tripoli
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for Tripoli have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tripoli
    • Tripoli is located in Washington County

How Far From Pattens Mills to ...

We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Pattens Mills to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Pattens Mills and extending to:

  • Hudson Falls, which is the Seat of Washington County, lies just to the South.
  • Albany, which is the State Capital of New York, lies 50 miles [80.5 km]<3> to the south (S). If you could walk a straight line from Pattens Mills to Albany, with an average speed<4> of 2.2 miles [3.5 km] per hour, it would take most of three days to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take most of two days.
  • The White House (Washington, DC) is 357 miles [574.5 km] to the south southwest (SSW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take five to six hours, a buggy would take 14 days and walking would take 21 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,569 miles [8,962.4 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,286 miles [10,116.3 km] and it lies to the east northeast (ENE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,161 miles [6,696.5 km] and it lies to the east northeast (ENE).<8>

Unfortunately, we don't know of a website for Pattens Mills. If you can help, please contact us through our Feedback Page.

The official website for Washington County: www.co.washington.ny.us

The official website for State of New York: https://www.ny.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Pattens Mills) to Point B.Our distance measurements begin at a specific point in Pattens Mills. The point we use is located at these GPS coordinates - Latitude: 43.3828, Longitude: -73.6040       In this case, the coordinates for Pattens Mills have been provided by the Geographic Names Information System (GNIS).
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Pattens Mills to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 305.378 degrees.
<7>The calculated bearing (or angle) to Mecca is 301.318 degrees.
<8>The calculated bearing (or angle) to the Vatican is 301.231 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024