Miscellaneous Information
Various Identification Codes ...
GNIS Codes ...
The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, chose a new name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).
The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).
A unique and permanent number has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:
GNIS ID for New York Mills: 2391014
GNIS ID for Oneida County: 974131
GNIS ID for New York: 1779796
FIPS Codes ...
In a past effort, various federal agencies worked together to create a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.
The following FIPS codes apply to New York Mills:
| Place (Community) Code: | 51011 |
| State Code: | 36 (New York) |
| County Code: | 065 (Oneida County) |
Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:
| State/Place Code: | 36/51011 |
| State/County Code: | 36/065 |
As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:
| FIPS Code | translates to | GNIS Code | |
| State of New York: | 36 | 1779796 | |
| Oneida County: | 36/065 | 974131 | |
| New York Mills: | 36/51011 | 2391014 |
GPS Location - GNIS vs Census ...
An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of New York Mills, it is a point within New York Mills that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.
For New York Mills, the GNIS GPS location is given as:
Lat: 43° 6' 3" (or 43.1°)
Lon: -75° 17' 33" (or -75.29°)
Determined by its statistical needs, the Census Bureau has defined a sampling area for New York Mills - this area also contains a map point. As with the GNIS code, the location of the Census point should be considered as being arbitrary within the sampling area.
For New York Mills, the Census 2010 GPS location is given as:
Lat: 43° 6' 2" (or 43.1°)
Lon: -75° 17' 35" (or -75.29°)
The map point defined by the Census Bureau lies 152.6 feet to the southwest<1> of the point given by the GNIS (see above).
You might note that the GPS location given for the 2010 Census is different than the location that was specified by the 2000 Census:
Lat: 43° 6' 9" (or 43.1°)
Lon: -75° 17' 31" (or -75.29°)
The GPS location given for the 2000 Census lies 730 feet to the north<2> of the point given by the 2010 Census.
Regional Codes ...
For statistical purposes, the US Census Bureau has divided the country into four Regions. New York Mills is located in Region #1 (the Northeast Region).
In turn, the US Census Bureau has further divided each Region into Divisions. New York Mills is located in Division #2 (the Middle Atlantic Division).
The Office of Management and Budget (OMB) has created ten Federal Regions. New York Mills is located in Region II (Region 2).
The Federal Emergency Management Agency (FEMA) has created ten Management Regions. New York Mills is located in Region II (Region 2).
Referenced GNIS Records ...
GNIS ID #958479 (Name of Record: New York Mills)
Class: populated place
A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.
A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.
County: Oneida
Map Name: Utica West
Lat: 43.1053475 Lon: -75.2912778
Elev: 142 ft.
GNIS ID #2391014 (Name of Record: Village of New York Mills)
Class: civil
A political division formed for administrative purposes (such as a borough, county, incorporated place, parish, town or township).
A 'civil' record may have a corresponding 'census' or 'populated place' record. The information contained in the 'civil' record applies only to the class and should not be confused with either the 'census' and 'populated place' classes.
County: Oneida
Map Name: Utica West
Lat: 43.1009691 Lon: -75.292665
Elev: 153 ft.
Referenced FIPS Records ...
FIPS Code: 36/51011 (Place Name: New York Mills)
County: Oneida (FIPS State/County: 36/065)
Class: C1
Identifies an incorporated place (ie- New York Mills) that does not serve as a primary county division - or in other words, it is included in and is part of a primary county division (ie- Oneida County).
GSA Code: 4200
MRF Code: 2510
MSA Code: 8680
Off-the-Road Links ...
Unfortunately, we don't know of a website for New York Mills. If you can help, please contact us through our Feedback Page.
The official website for Oneida County: www.co.oneida.ny.us/
The official website for State of New York: https://www.ny.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
The official website of the U.S. Census Bureau
The official website of the U.S. Office of Management and Budget (OMB)
The official website of the U.S. Federal Emergency Management Agency (FEMA)