Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Milford had a population of 810 people in 1895 with a post office and railroad service. In 2020, Milford had a population of 390 people.
The following communities are listed based on their distance from Milford, with the one closest to Milford listed first.
- Hartwick Seminary
(3 miles [4.8 km] to the north)
- Portlandville
(4 miles [6.4 km] to the south)
- Maryland
(4 miles [6.4 km] to the southeast)
- Westville
(4 miles [6.4 km] to the northeast)
- Chase
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Chase have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chase
- Chase is located in Otsego County
- Chaseville
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Chaseville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaseville
- Chaseville is located in Otsego County
- Phoenix Mills
(5 miles [8 km] to the north)
- Mount Vision
(5 miles [8 km] to the west)
- Schenevus
(6 miles [9.7 km] to the southeast)
- Elk Creek
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Elk Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk Creek
- Elk Creek is located in Otsego County
- Toddsville
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Toddsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toddsville
- Toddsville is located in Otsego County
- South Hartwick
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for South Hartwick have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Hartwick
- South Hartwick is located in Otsego County
- Colliersville
(7 miles [11.3 km] to the south)
- Cooperstown
(7 miles [11.3 km] to the north)
- Hartwick
(7 miles [11.3 km] to the northwest)
- Lena
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lena. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lena
- Lena is located in Otsego County
- Google driving directions:
- From your current location to Lena
- From Milford to Lena
- Laurens
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Laurens have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurens
- Laurens is located in Otsego County
- Population from the 2020 Census: 242 people
- Jump to TripAdvisor's Tourism page for Laurens <3>
- Westford
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Westford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westford
- Westford is located in Otsego County
- Jump to TripAdvisor's Tourism page for Westford <3>
- Middlefield
(8 miles [12.9 km] to the northeast)
- Fly Creek
(9 miles [14.5 km] to the north)
- Oaksville
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Oaksville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Oaksville
- Oaksville is located in Otsego County
- Google driving directions:
- From your current location to Oaksville
- From Milford to Oaksville
- Davenport Center
(9 miles [14.5 km] to the south)
- Davenport
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Davenport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davenport
- Davenport is located in Delaware County
- Jump to TripAdvisor's Tourism page for Davenport <3>
- Fergusonville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Fergusonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fergusonville
- Fergusonville is located in Delaware County
- Worcester
(9 miles [14.5 km] to the east)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Milford. If you can help, please contact us through our Feedback Page.
The official website for Otsego County: www.otsegocounty.com/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Milford, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |