RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New York >> Putnam County >> Mahopac Mines >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
New York


The Commemorative Quarter for New York







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Mahopac Mines, we use the following websites to find information relevant to Mahopac Mines and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Mahopac Mines:
    • 41.398149, -73.759021
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Mahopac Mines
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Mahopac Mines ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Bullet Hole
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Bullet Hole have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bullet Hole
    • Bullet Hole is located in Putnam County
  • Butlerville
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Butlerville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Butlerville
    • Butlerville is located in Westchester County
  • Crafts
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Crafts have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crafts
    • Crafts is located in Putnam County
  • Deans Corner
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Deans Corner have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deans Corner
    • Deans Corner is located in Putnam County
  • Dennytown
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Dennytown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dennytown
    • Dennytown is located in Putnam County
  • Farmers Mills
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Farmers Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmers Mills
    • Farmers Mills is located in Putnam County
  • Field Corners
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Field Corners have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Field Corners
    • Field Corners is located in Putnam County
  • Gilbert Corners
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Gilbert Corners have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilbert Corners
    • Gilbert Corners is located in Putnam County
  • Granite Springs
    (6 miles [9.7 km] to the south)
  • Heritage Hills
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Heritage Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heritage Hills
    • Heritage Hills is located in Westchester County
  • Kent Cliffs
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Kent Cliffs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kent Cliffs
    • Kent Cliffs is located in Putnam County
  • Lake Purdy
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lake Purdy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Purdy
    • Lake Purdy is located in Westchester County
  • Continue List   (4 more) ...
    • Lincolndale
      (5 miles [8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lincolndale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lincolndale
      • Lincolndale is located in Westchester County
      • Jump to TripAdvisor's Tourism page for Lincolndale <2>
    • Meads Corners
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Meads Corners have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meads Corners
      • Meads Corners is located in Putnam County
    • Stillwater
      (2 miles [3.2 km] to the south)
      • Note: The GPS coordinates that we are using for Stillwater have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stillwater
      • Stillwater is located in Putnam County
    • Sunnybrook
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Sunnybrook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunnybrook
      • Sunnybrook is located in Putnam County

How Far From Mahopac Mines to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Mahopac Mines to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Mahopac Mines and extending to:

  • Carmel, which is the Seat of Putnam County, lies just to the East Northeast.
  • Albany, which is the State Capital of New York, lies 86 miles [138.4 km]<3> to the north (N). If you could drive a straight line from Mahopac Mines to Albany, with an average speed<4>of 63 miles [101.4 km] per hour, it would take less than two hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 5 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take most of three days.
  • The White House (Washington, DC) is 244 miles [392.7 km] to the southwest (SW). Driving would take nearly four hours, a buggy would take 10 days and walking would take 14 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,655 miles [9,100.8 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,364 miles [10,241.9 km] and it lies to the east northeast (ENE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,240 miles [6,823.6 km] and it lies to the east northeast (ENE).<8>

Unfortunately, we don't know of a website for Mahopac Mines. If you can help, please contact us through our Feedback Page.

The official website for Putnam County: www.putnamcountyny.com/

The official website for State of New York: https://www.ny.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Mahopac Mines) to Point B.Our distance measurements begin at a specific point in Mahopac Mines. The point we use is located at these GPS coordinates - Latitude: 41.3981, Longitude: -73.7590       In this case, the coordinates for Mahopac Mines have been provided by the Geographic Names Information System (GNIS).
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Mahopac Mines to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 305.72 degrees.
<7>The calculated bearing (or angle) to Mecca is 301.377 degrees.
<8>The calculated bearing (or angle) to the Vatican is 302.244 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024