Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Gloversville had a population of 13,864 people in 1895 with a post office and railroad service. In 2020, Gloversville had a population of 14,553 people.
The following communities are listed based on their distance from Gloversville, with the one closest to Gloversville listed first.
- Kingsboro
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Kingsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsboro
- Kingsboro is located in Fulton County
- Johnstown
(3 miles [4.8 km] to the southwest)
- Bleecker
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Bleecker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bleecker
- Bleecker is located in Fulton County
- Munsonville
(5 miles [8 km] to the northeast)
- Mayfield
(5 miles [8 km] to the northeast)
- Kecks Center
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Kecks Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kecks Center
- Kecks Center is located in Fulton County
- Sammonsville
(6 miles [9.7 km] to the southwest)
- Fonda
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Fonda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fonda
- Fonda is located in Montgomery County
- Population from the 2020 Census: 750 people
- Jump to TripAdvisor's Tourism page for Fonda <3>
- Fultonville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Fultonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fultonville
- Fultonville is located in Montgomery County
- Population from the 2020 Census: 780 people
- Jump to TripAdvisor's Tourism page for Fultonville <3>
- Tribes Hill
(7 miles [11.3 km] to the south)
- Perth
(7 miles [11.3 km] to the east)
- Broadalbin
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Broadalbin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broadalbin
- Broadalbin is located in Fulton County
- Population from the 2020 Census: 1,260 people
- Jump to TripAdvisor's Tourism page for Broadalbin <3>
- Auriesville
(8 miles [12.9 km] to the south)
- Fort Hunter
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Fort Hunter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Hunter
- Fort Hunter is located in Montgomery County
- Jump to TripAdvisor's Tourism page for Fort Hunter <3>
- Fort Johnson
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Fort Johnson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Johnson
- Fort Johnson is located in Montgomery County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Fort Johnson <3>
- Rockwood
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rockwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rockwood
- Rockwood is located in Fulton County
- Google driving directions:
- From your current location to Rockwood
- From Gloversville to Rockwood
- North Broadalbin
(9 miles [14.5 km] to the northeast)
- Cranberry Creek
(9 miles [14.5 km] to the northeast)
- Garoga
(9 miles [14.5 km] to the west)
- Ephratah
(10 miles [16.1 km] to the west)
- Rockton
(10 miles [16.1 km] to the southeast)
- Mills Corners
(10 miles [16.1 km] to the east)
- Union Mills
(10 miles [16.1 km] to the east)
- Benedict
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Benedict have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benedict
- Benedict is located in Fulton County
- Yosts
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Yosts have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yosts
- Yosts is located in Montgomery County
- Randall
(11 miles [17.7 km] to the southwest)
- Glen
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Glen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen
- Glen is located in Montgomery County
- Amsterdam
(11 miles [17.7 km] to the southeast)
Off-the-Road Links ...
The official website for Gloversville: www.cityofgloversville.com/
The official website for Fulton County: www.fulton.ny.us/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gloversville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |