Around Glenco Mills ...
Below is a sample of nearby communities based on their distance from Glenco Mills, with the nearest first.
- Churchtown
(2 miles [3.2 km] to the northeast)- Jump to our Gazetteer entry for Churchtown
- Churchtown is located in Columbia County
- Google driving directions:
- From your current location to Churchtown
- From Glenco Mills to Churchtown
- West Taghkanic
(2 miles [3.2 km] to the southeast)- Jump to our Gazetteer entry for West Taghkanic
- West Taghkanic is located in Columbia County
- Google driving directions:
- From your current location to West Taghkanic
- From Glenco Mills to West Taghkanic
- Taghkanic
(3 miles [4.8 km] to the east)- Jump to our Gazetteer entry for Taghkanic
- Taghkanic is located in Columbia County
- Jump to TripAdvisor's Tourism page for Taghkanic <1>
- Google driving directions:
- From your current location to Taghkanic
- From Glenco Mills to Taghkanic
- Burden
(4 miles [6.4 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Burden. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Burden
- Burden is located in Columbia County
- Google driving directions:
- From your current location to Burden
- From Glenco Mills to Burden
- Hollowville
(4 miles [6.4 km] to the northeast)- Jump to our Gazetteer entry for Hollowville
- Hollowville is located in Columbia County
- Jump to TripAdvisor's Tourism page for Hollowville <1>
- Google driving directions:
- From your current location to Hollowville
- From Glenco Mills to Hollowville
- Greenport Center
(6 miles [9.7 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Greenport Center. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Greenport Center
- Greenport Center is located in Columbia County
- Google driving directions:
- From your current location to Greenport Center
- From Glenco Mills to Greenport Center
- Martindale
(6 miles [9.7 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Martindale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Martindale
- Martindale is located in Columbia County
- Google driving directions:
- From your current location to Martindale
- From Glenco Mills to Martindale
- Catskill
(7 miles [11.3 km] to the northwest) - Elizaville
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Elizaville
- Elizaville is located in Columbia County
- Jump to TripAdvisor's Tourism page for Elizaville <1>
- Google driving directions:
- From your current location to Elizaville
- From Glenco Mills to Elizaville
- Continue List (6 more) ...
- Germantown
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Germantown
- Germantown is located in Columbia County
- Jump to TripAdvisor's Tourism page for Germantown <1>
- Google driving directions:
- From your current location to Germantown
- From Glenco Mills to Germantown
- Hudson
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Hudson
- Hudson is located in Columbia County
- Population from the 2020 Census: 6,017 people
- Jump to TripAdvisor's Tourism page for Hudson <1>
- Google driving directions:
- From your current location to Hudson
- From Glenco Mills to Hudson
- North Germantown
(7 miles [11.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for North Germantown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Germantown
- North Germantown is located in Columbia County
- Google driving directions:
- From your current location to North Germantown
- From Glenco Mills to North Germantown
- Ancram
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Ancram
- Ancram is located in Columbia County
- Jump to TripAdvisor's Tourism page for Ancram <1>
- Google driving directions:
- From your current location to Ancram
- From Glenco Mills to Ancram
- Athens
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Athens
- Athens is located in Greene County
- Population from the 2020 Census: 1,594 people
- Jump to TripAdvisor's Tourism page for Athens <1>
- Google driving directions:
- From your current location to Athens
- From Glenco Mills to Athens
- Copake Lake
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Copake Lake
- Copake Lake is located in Columbia County
- Google driving directions:
- From your current location to Copake Lake
- From Glenco Mills to Copake Lake
- Germantown
For more communities neighboring Glenco Mills, please visit our County-by-County Page for Glenco Mills.
Columbia County ...
Glenco Mills is located in Columbia County<4>.
The following counties adjoin and form the boundaries of Columbia County: Litchfield (CT), Berkshire (MA), Albany, Dutchess, Greene, Rensselaer & Ulster.
Curious and Interesting Names Near Glenco Mills ...
It seems like there is always a nearby community with a name that seems interesting, maybe familiar or just catches our attention in some other way. We've collected some names which strike us as being curious or interesting. Our list can be found on the Tidbits & Trivia Page for Glenco Mills.
Airports Near Glenco Mills ...
When a trip includes a flight, we try to find an airport that best fits our travel plans.<5> To that purpose, we've assembled a list of that are relatively close to Glenco Mills and that information can be found on the Airports Page for Glenco Mills.
Websites We Enjoy ...
When we're planning a trip, we like to check the following websites for sights, attractions and places to visit.
- For the State of New York:
- TripAdvisor Links for:
- Also of Interest:
Off-the-Road Links ...
Unfortunately, we don't know of a website for Glenco Mills. If you can help, please contact us through our Feedback Page.
The official website for Columbia County: www.columbiacountyny.com/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
| <1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | If you're interested in how the shape of New York's counties, including Columbia, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <5> | When we are planning a trip (for example, to Glenco Mills), we usually look for the obvious: the choice of airlines that fly into the airport, the number of flights, the connections we have to make, which car rentals are available, etc. We also look for sights and attractions that we might find between any given airport and our destination - we do love exploring. We're willing to fly into a more distant airport if we can get the services and amenities that we like. Even though our choice of airport might be inconvenient to others, it usually gives us a better trip. |