Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Fort Hunter had a population of 354 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Fort Hunter, with the one closest to Fort Hunter listed first.
- Tribes Hill
(Less than 2 miles to the north)
- Auriesville
(Less than 2 miles to the southwest)
- Fort Johnson
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Fort Johnson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Johnson
- Fort Johnson is located in Montgomery County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Fort Johnson <2>
- Glen
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Glen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen
- Glen is located in Montgomery County
- Amsterdam
(4 miles [6.4 km] to the east)
- Fonda
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Fonda have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fonda
- Fonda is located in Montgomery County
- Population from the 2020 Census: 750 people
- Jump to TripAdvisor's Tourism page for Fonda <2>
- Fultonville
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Fultonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fultonville
- Fultonville is located in Montgomery County
- Population from the 2020 Census: 780 people
- Jump to TripAdvisor's Tourism page for Fultonville <2>
- Minaville
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Minaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minaville
- Minaville is located in Montgomery County
- Rockton
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Rockton
- Rockton is located in Montgomery County
- Perth
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Perth
- Perth is located in Fulton County
- Johnstown
(6 miles [9.7 km] to the northwest)
- Charleston
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Charleston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charleston
- Charleston is located in Montgomery County
- Scotch Bush
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Scotch Bush have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotch Bush
- Scotch Bush is located in Montgomery County
- Cranesville
(7 miles [11.3 km] to the east)
- Randall
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Randall
- Randall is located in Montgomery County
- Gloversville
(8 miles [12.9 km] to the north)
- Sammonsville
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Sammonsville
- Sammonsville is located in Fulton County
- Yosts
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Yosts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yosts
- Yosts is located in Montgomery County
- Burtonsville
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Burtonsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Burtonsville
- Burtonsville is located in Montgomery County
- Kingsboro
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Kingsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsboro
- Kingsboro is located in Fulton County
- Braman Corners
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Braman Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Braman Corners
- Braman Corners is located in Schenectady County
- Broadalbin
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Broadalbin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broadalbin
- Broadalbin is located in Fulton County
- Population from the 2020 Census: 1,260 people
- Jump to TripAdvisor's Tourism page for Broadalbin <2>
- Kecks Center
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Kecks Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kecks Center
- Kecks Center is located in Fulton County
- Currytown
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Currytown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Currytown
- Currytown is located in Montgomery County
- Rural Grove
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Rural Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rural Grove
- Rural Grove is located in Montgomery County
- Oak Ridge
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Oak Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Ridge
- Oak Ridge is located in Montgomery County
- Mariaville
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mariaville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mariaville
- Mariaville is located in Schenectady County
- Jump to TripAdvisor's Tourism page for Mariaville <2>
- Pattersonville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Pattersonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pattersonville
- Pattersonville is located in Schenectady County
- Jump to TripAdvisor's Tourism page for Pattersonville <2>
- Munsonville
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Munsonville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Munsonville
- Munsonville is located in Fulton County
Off-the-Road Links ...
The official website for Montgomery County: www.co.montgomery.ny.us/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fort Hunter, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |