|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Eisaman Corners Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Eisaman Corners Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Eisaman Corners Cemetery. We've listed the following communities based on their distance, with the closest first.
- Siloam
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Siloam
- Siloam is located in Madison County
- Peterboro
(2 miles [3.2 km] to the south)
- Munnsville
(4 miles [6.4 km] to the east)
- Valley Mills
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Valley Mills
- Valley Mills is located in Madison County
- Clockville
(4 miles [6.4 km] to the northwest)
- Wampsville
(5 miles [8 km] to the north)
- Munns
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Munns
- Munns is located in Madison County
- Kenwood
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Kenwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kenwood
- Kenwood is located in Madison County
- Pratts Hollow
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Pratts Hollow
- Pratts Hollow is located in Madison County
- Pratts
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Pratts. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pratts
- Pratts is located in Madison County
- Sherrill
(6 miles [9.7 km] to the northeast)
- Oneida Castle
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Oneida Castle
- Oneida Castle is located in Oneida County
- Population from the 2020 Census: 603 people
- Canastota
(6 miles [9.7 km] to the northwest)
- Oneida
(6 miles [9.7 km] to the north)
- Cottons
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for Cottons
- Cottons is located in Madison County
- Morrisville
(7 miles [11.3 km] to the south)
- Sconondoa
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Sconondoa
- Sconondoa is located in Oneida County
- Bingley
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Bingley
- Bingley is located in Madison County
- Morrisville Station
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Morrisville Station. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Morrisville Station
- Morrisville Station is located in Madison County
- Pine Woods
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Pine Woods
- Pine Woods is located in Madison County
- Augusta
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Augusta
- Augusta is located in Oneida County
- Vernon
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Vernon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vernon
- Vernon is located in Oneida County
- Population from the 2020 Census: 1,138 people
- Jump to TripAdvisor's Tourism page for Vernon <2>
- Chittenango Falls
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Chittenango Falls
- Chittenango Falls is located in Madison County
- West Eaton
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for West Eaton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for West Eaton
- West Eaton is located in Madison County
- Bouckville
(9 miles [14.5 km] to the southeast)
- Solsville
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Solsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Solsville
- Solsville is located in Madison County
- Jump to TripAdvisor's Tourism page for Solsville <2>
- Sullivan
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Sullivan
- Sullivan is located in Madison County
- Sulphur Springs
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Sulphur Springs
- Sulphur Springs is located in Madison County
- Sulphur Springs has also been known as:
- Chittenango Springs
Off-the-Road Links ...
The official website for Madison County: www.madisoncounty.org/ The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Eisaman Corners Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.9983, Longitude: -75.6739 In this case, the coordinates for the Eisaman Corners Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|