Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Burke had a population of 260 people in 1895 with a post office and railroad service. In 2020, Burke had a population of 199 people.
The following communities are listed based on their distance from Burke, with the one closest to Burke listed first.
- Thayer Corners
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for Thayer Corners have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thayer Corners
- Thayer Corners is located in Franklin County
- Sun
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Sun have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun
- Sun is located in Franklin County
- Chateaugay
(4 miles [6.4 km] to the east)
- Malone
(7 miles [11.3 km] to the southwest)
- Whippleville
(7 miles [11.3 km] to the southwest)
- Brainardsville
(7 miles [11.3 km] to the southeast)
- Trout River
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Trout River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trout River
- Trout River is located in Franklin County
- Chasm Falls
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Chasm Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chasm Falls
- Chasm Falls is located in Franklin County
- Westville Center
(11 miles [17.7 km] to the west)
- North Bangor
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for North Bangor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Bangor
- North Bangor is located in Franklin County
- Jump to TripAdvisor's Tourism page for North Bangor <3>
- Bangor
(12 miles [19.3 km] to the southwest)
- Churubusco
(12 miles [19.3 km] to the east)
- Ellenburg Center
(13 miles [20.9 km] to the east)
- West Bangor
(14 miles [22.5 km] to the southwest)
- Skerry
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Skerry. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Skerry
- Skerry is located in Franklin County
- Google driving directions:
- From your current location to Skerry
- From Burke to Skerry
- Merrill
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Merrill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merrill
- Merrill is located in Clinton County
- Clinton Mills
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Clinton Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinton Mills
- Clinton Mills is located in Clinton County
- Fort Covington Center
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Fort Covington Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Covington Center
- Fort Covington Center is located in Franklin County
- Ellenburg
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Ellenburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellenburg
- Ellenburg is located in Clinton County
- Jump to TripAdvisor's Tourism page for Ellenburg <3>
- Brushton
(17 miles [27.4 km] to the west)
- Lyon Mountain
(17 miles [27.4 km] to the southeast)
- Fort Covington
(17 miles [27.4 km] to the west)
- East Dickinson
(18 miles [29 km] to the southwest)
- Wolf Pond
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Wolf Pond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolf Pond
- Wolf Pond is located in Franklin County
- Standish
(18 miles [29 km] to the southeast)
- Ellenburg Depot
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Ellenburg Depot have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellenburg Depot
- Ellenburg Depot is located in Clinton County
- South Bombay
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for South Bombay have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Bombay
- South Bombay is located in Franklin County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Burke. If you can help, please contact us through our Feedback Page.
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Burke, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |