Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Newfoundland had a population of 507 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Newfoundland, with the one closest to Newfoundland listed first.
- Echo Lake
(2 miles [3.2 km] to the east)
- Echo Lake is located in Passaic County
- Jump to our Gazetteer entry for Echo Lake
- Oak Ridge
(2 miles [3.2 km] to the west)
- Oak Ridge is located in Passaic County
- Jump to our Gazetteer entry for Oak Ridge
- Green Lake
(3 miles [4.8 km] to the southwest)
- Green Lake is located in Morris County
- Jump to our Gazetteer entry for Green Lake
- Smiths Mills
(3 miles [4.8 km] to the southeast)
- Smiths Mills is located in Passaic County
- Jump to our Gazetteer entry for Smiths Mills
- Upper Macopin
(3 miles [4.8 km] to the northeast)
- Upper Macopin is located in Passaic County
- Jump to our Gazetteer entry for Upper Macopin
- Marcella
(4 miles [6.4 km] to the southwest)
- Marcella is located in Morris County
- Jump to our Gazetteer entry for Marcella
- Milton
(5 miles [8 km] to the west)
- Milton is located in Morris County
- Jump to our Gazetteer entry for Milton
- Butler
(5 miles [8 km] to the southeast)
- Stockholm
(5 miles [8 km] to the northwest)
- Stockholm is located in Sussex County
- Jump to our Gazetteer entry for Stockholm
- Brook Valley
(6 miles [9.7 km] to the southeast)
- Brook Valley is located in Morris County
- Jump to our Gazetteer entry for Brook Valley
- West Milford
(6 miles [9.7 km] to the northeast)
- West Milford is located in Passaic County
- Jump to our Gazetteer entry for West Milford
- Hibernia
(7 miles [11.3 km] to the southwest)
- Pompton Junction
(7 miles [11.3 km] to the east)
- Pompton Junction is located in Passaic County
- Jump to our Gazetteer entry for Pompton Junction
- Weldon
(8 miles [12.9 km] to the southwest)
- Pompton
(8 miles [12.9 km] to the southeast)
- Pompton is located in Passaic County
- Jump to our Gazetteer entry for Pompton
- Monks
(8 miles [12.9 km] to the northeast)
- Monks is located in Passaic County
- Jump to our Gazetteer entry for Monks
- South Ogdensburg
(8 miles [12.9 km] to the west)
- South Ogdensburg is located in Sussex County
- Jump to our Gazetteer entry for South Ogdensburg
- Mount Hope
(9 miles [14.5 km] to the southwest)
- Mount Hope is located in Morris County
- Jump to our Gazetteer entry for Mount Hope
- Montville
(9 miles [14.5 km] to the south)
- Pequannock
(9 miles [14.5 km] to the southeast)
- Pequannock is located in Morris County
- Jump to our Gazetteer entry for Pequannock
- Pompton Plains
(9 miles [14.5 km] to the southeast)
- Pompton Plains is located in Morris County
- Jump to our Gazetteer entry for Pompton Plains
- Erskine
(9 miles [14.5 km] to the east)
- Erskine is located in Passaic County
- Jump to our Gazetteer entry for Erskine
- Hewitt
(9 miles [14.5 km] to the northeast)
- Hewitt is located in Passaic County
- Jump to our Gazetteer entry for Hewitt
- Cooper
(9 miles [14.5 km] to the northeast)
- Cooper is located in Passaic County
- Jump to our Gazetteer entry for Cooper
- Hardistonville
(9 miles [14.5 km] to the northwest)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Newfoundland, please let us know so that we can improve our accuracy. |