Miscellaneous Information
Various Identification Codes ...
GNIS Codes ...
The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, establish a new name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).
The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).
A unique and permanent identifier has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:
GNIS ID for Culvers Inlet: 875776
GNIS ID for Sussex County: 882236
GNIS ID for New Jersey: 1779795
FIPS Codes ...
In a past effort, various federal agencies worked together to create a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.
The following FIPS codes apply to Culvers Inlet:
| Place (Community) Code: | 16225 |
| State Code: | 34 (New Jersey) |
| County Code: | 037 (Sussex County) |
Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:
| State/Place Code: | 34/16225 |
| State/County Code: | 34/037 |
As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:
| FIPS Code | translates to | GNIS Code | |
| State of New Jersey: | 34 | 1779795 | |
| Sussex County: | 34/037 | 882236 | |
| Culvers Inlet: | 34/16225 | 875776 |
GPS Location - GNIS Coordinates ...
An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of Culvers Inlet, it is a point within Culvers Inlet that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.
For Culvers Inlet, the GNIS GPS location is given as:
Lat: 41° 10' 7" (or 41.17°)
Lon: -74° 47' 31" (or -74.79°)
Regional Codes ...
For statistical purposes, the US Census Bureau has divided the country into four Regions. Culvers Inlet is located in Region #1 (the Northeast Region).
In turn, the US Census Bureau has further divided each Region into Divisions. Culvers Inlet is located in Division #2 (the Middle Atlantic Division).
The Office of Management and Budget (OMB) has created ten Federal Regions. Culvers Inlet is located in Region II (Region 2).
The Federal Emergency Management Agency (FEMA) has created ten Management Regions. Culvers Inlet is located in Region II (Region 2).
Referenced GNIS Records ...
GNIS ID #875776 (Name of Record: Culvers Inlet)
Class: populated place
A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.
A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.
County: Sussex
Map Name: Culvers Gap
Lat: 41.1687069 Lon: -74.7921109
Elev: 264 ft.
Referenced FIPS Records ...
FIPS Code: 34/16225 (Place Name: Culvers Inlet)
County: Sussex (FIPS State/County: 34/037)
Class: U6
Identifies a populated place (ie- Culvers Inlet) that is wholly or substantially located outside the boundaries of any incorporated place or CDP (Census Designated Place) that has an authoritative common name recognized by the U.S. Geological Survey (USGS).
MSA Code: 5640
Off-the-Road Links ...
Unfortunately, we don't know of a website for Culvers Inlet. If you can help, please contact us through our Feedback Page.
The official website for Sussex County: www.sussex.nj.us/
The official website for State of New Jersey: https://www.state.nj.us/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
The official website of the U.S. Census Bureau
The official website of the U.S. Office of Management and Budget (OMB)
The official website of the U.S. Federal Emergency Management Agency (FEMA)