Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Chambers Corners in the Atlas, the following communities of the 1890's would have been found near the current location of Chambers Corners. The following communities are listed based on their distance, with the one closest to Chambers Corners listed first.
- Smithville
(2 miles [3.2 km] to the south)
- Smithville is located in Burlington County
- Jump to our Gazetteer entry for Smithville
- Ewansville
(2 miles [3.2 km] to the south)
- Ewansville is located in Burlington County
- Jump to our Gazetteer entry for Ewansville
- Jobstown
(2 miles [3.2 km] to the northeast)
- Jobstown is located in Burlington County
- Jump to our Gazetteer entry for Jobstown
- Jacksonville
(2 miles [3.2 km] to the northwest)
- Jacksonville is located in Burlington County
- Jump to our Gazetteer entry for Jacksonville
- Mount Holly
(3 miles [4.8 km] to the southwest)
- Birmingham
(3 miles [4.8 km] to the southeast)
- Birmingham is located in Burlington County
- Jump to our Gazetteer entry for Birmingham
- Juliustown
(3 miles [4.8 km] to the east)
- Columbus
(3 miles [4.8 km] to the north)
- South Pemberton
(4 miles [6.4 km] to the southeast)
- South Pemberton is located in Burlington County
- Jump to our Gazetteer entry for South Pemberton
- Lewistown
(4 miles [6.4 km] to the east)
- Lewistown is located in Burlington County
- Jump to our Gazetteer entry for Lewistown
- Hainesport
(5 miles [8 km] to the southwest)
- Lumberton
(5 miles [8 km] to the southwest)
- Lumberton is located in Burlington County
- Jump to our Gazetteer entry for Lumberton
- Vincentown
(5 miles [8 km] to the south)
- Vincentown is located in Burlington County
- Jump to our Gazetteer entry for Vincentown
- Buddtown
(5 miles [8 km] to the south)
- Buddtown is located in Burlington County
- Jump to our Gazetteer entry for Buddtown
- Georgetown
(5 miles [8 km] to the northeast)
- Georgetown is located in Burlington County
- Jump to our Gazetteer entry for Georgetown
- Deacons
(5 miles [8 km] to the west)
- Deacons is located in Burlington County
- Jump to our Gazetteer entry for Deacons
- New Lisbon
(6 miles [9.7 km] to the southeast)
- New Lisbon is located in Burlington County
- Jump to our Gazetteer entry for New Lisbon
- Pointville
(6 miles [9.7 km] to the east)
- Pointville is located in Burlington County
- Jump to our Gazetteer entry for Pointville
- Sykesville
(6 miles [9.7 km] to the northeast)
- Sykesville is located in Burlington County
- Jump to our Gazetteer entry for Sykesville
- Stevens
(6 miles [9.7 km] to the northwest)
- Stevens is located in Burlington County
- Jump to our Gazetteer entry for Stevens
- Kinkora
(6 miles [9.7 km] to the north)
- Kinkora is located in Burlington County
- Jump to our Gazetteer entry for Kinkora
- Bougher
(7 miles [11.3 km] to the west)
- Bougher is located in Burlington County
- Jump to our Gazetteer entry for Bougher
- Masonville
(7 miles [11.3 km] to the west)
- Masonville is located in Burlington County
- Jump to our Gazetteer entry for Masonville
- Burlington
(7 miles [11.3 km] to the northwest)
- Rancocas
(7 miles [11.3 km] to the west)
- Rancocas is located in Burlington County
- Jump to our Gazetteer entry for Rancocas
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Chambers Corners, please let us know so that we can improve our accuracy. |