TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Yancton, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Yancton - within 28 miles [45.1 km]<1>.
Our list sorts the communities in alphabetical order. There are 25 communities listed:
- Brownville
(25 miles [40.2 km] to the northwest)
- Craig
(8 miles [12.9 km] to the north)
- Dawson
(22 miles [35.4 km] to the west)
- Denton
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denton
- Denton is located in Doniphan County (KS)
- Population from the 2020 Census: 137 people
- Jump to TripAdvisor's Tourism page for Denton <2>
- Everest
(27 miles [43.5 km] to the south)
- Fairfax
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfax
- Fairfax is located in Atchison County (MO)
- Population from the 2020 Census: 568 people
- Jump to TripAdvisor's Tourism page for Fairfax <2>
- Fairview
(23 miles [37 km] to the southwest)
- Falls City
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Falls City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falls City
- Falls City is located in Richardson County
- Population from the 2020 Census: 4,076 people
- Jump to TripAdvisor's Tourism page for Falls City <2>
- Forest City
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Forest City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Holt County (MO)
- Population from the 2020 Census: 238 people
- Jump to TripAdvisor's Tourism page for Forest City <2>
- Hiawatha
(16 miles [25.7 km] to the south)
- Highland
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Highland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland
- Highland is located in Doniphan County (KS)
- Population from the 2020 Census: 986 people
- Jump to TripAdvisor's Tourism page for Highland <2>
- Horton
(28 miles [45.1 km] to the south)
- Humboldt
(28 miles [45.1 km] to the west)
- Mound City
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Mound City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound City
- Mound City is located in Holt County (MO)
- Population from the 2020 Census: 997 people
- Jump to TripAdvisor's Tourism page for Mound City <2>
- Nemaha
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Nemaha
- Nemaha is located in Nemaha County
- Population from the 2020 Census: 143 people
- Nemaha has also been known as:
- Nemaha City
- Jump to TripAdvisor's Tourism page for Nemaha <2>
- Oregon
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Oregon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oregon
- Oregon is located in Holt County (MO)
- Population from the 2020 Census: 735 people
- Jump to TripAdvisor's Tourism page for Oregon <2>
- Rock Port
(23 miles [37 km] to the north)
- Rulo
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Rulo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rulo
- Rulo is located in Richardson County
- Population from the 2020 Census: 159 people
- Jump to TripAdvisor's Tourism page for Rulo <2>
- Sabetha
(23 miles [37 km] to the southwest)
- Salem
(16 miles [25.7 km] to the west)
- Shubert
(17 miles [27.4 km] to the northwest)
- Skidmore
(23 miles [37 km] to the northeast)
- Stella
(21 miles [33.8 km] to the northwest)
- Tarkio
(25 miles [40.2 km] to the north)
- Verdon
(16 miles [25.7 km] to the west)
Off-the-Road Links ...
The official website for Richardson County: www.co.richardson.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Yancton) to Point B.Our distance measurements begin at a specific point in Yancton. The point we use is located at these GPS coordinates - Latitude: 40.0778, Longitude: -95.4197 In this case, the coordinates for Yancton have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |