A Gazetteer for the United States and Canada
Census Data for Phillips ...
The most recent Census Estimate<1> was for 2017 and it gave Phillips a population of 293 people.
The last Decennial Census<2> was in 2010, which gave Phillips a population of 287 people.
The village of Phillips is located in Hamilton County. The 2010 Census gave Hamilton County a population of 9,124 people. This means that Phillips had 3.15% of the county's total population, making it Hamilton's 4th most populous community.
When the Census Bureau conducts a census for a village like Phillips, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the village.
Things like the population, area and housing for Phillips reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Phillips might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Phillips has a total area of 0.29 square miles [0.8 km²].
Hamilton County has a land area of 542 square miles [1,406 km²]. At 0.29 square miles [0.8 km²], Phillips has 0.05% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 40° 53' 51" (or 40.9°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (287 people) and land area (0.29 square miles [0.8 km²]) values from the 2010 Census, Phillips had a population density of 979 people per square mile [378.2 people/km²].
In comparison, the 2000 Census shows Phillips had a population of 336 people and a land area of 0.25 square miles [0.6 km²]. This gives a population density of 1,366 people per square mile [527 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Phillips. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about the changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Phillips had 142 Housing Units<3> and with its population of 287 people, this averages 2.02 people per Housing Unit.
The 2010 Census shows Phillips had a land area of 0.29 square miles [0.8 km²]. This translates to 484.6 Housing Units per square mile [187.1 housing units/km²].
From the Census of 2000: Phillips had 147 Housing Units, a population of 336 people and a land area of 0.25 square miles [0.6 km²]. This gives a density of 2.29 people per Housing Unit and 598 Housing Units per square mile [230.9 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Phillips and you need to be careful when comparing results between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
Hamilton County ...
The community of Phillips is located in Hamilton County.
The county had a population of 9,124 people at the 2010 Census. With it's population of 287 people, Phillips represented 3.15% of the county's total.
In addition, where the village of Phillips has a population density of 979 people per square mile [378.2 people/km²], Hamilton County averages 16.81 people per square mile [6.49 people/km²].
For more information, please visit our Census Page for Hamilton County.
Population Rings for Phillips ...
To help identify the number of people who live in Phillips and the surrounding area, we have drawn concentric rings centered on Phillips. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Phillips, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Phillips. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 19.21% larger than the 2000 Census.
The 2010 Census shows that the total area for Phillips was 0.29 square miles [0.8 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 0.25 square miles [0.6 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Phillips, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Phillips.
For the 2010 Census, the location was given as:
Lat: 40.897670° (or 40°53'51" N) [Map]
For the 2000 Census, the location given was:
Lat: 40.898034° (or 40°53'52" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 251.4 feet to the southwest<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2399661) to Phillips. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Phillips. The GNIS point has been mapped to the latitude/longitude:
Lat: 40.898257° (or 40°53'53" N) [Map]
The GSP location given for the 2010 Census lies 233.4 feet to the southwest<6> of the point given by the GNIS for Phillips. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Phillips.
Miscellaneous Information for Phillips ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Hamilton County or the village of Phillips:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Phillips:
GNIS ID for Phillips: 2399661
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 31 (Nebraska)
County Code: 081 (Hamilton County)
Place Code: 39030 (Phillips)
Misc. Census Codes ...
Phillips is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Phillips.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Phillips. If you can help, please contact us through our Feedback Page.
The official website for Hamilton County: www.co.hamilton.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 11 Mar 2019