Census Data for Parkview
As far as we can tell, Parkview has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Parkview, you might be interested in some nearby communities where we do:
- Grand Island
(Less than 2 miles to the north)- Jump to our Gazetteer entry for Grand Island
- Grand Island is located in Hall County
- Jump to TripAdvisor's Tourism page for Grand Island <1>
- Alda
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Alda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alda
- Alda is located in Hall County
- Jump to TripAdvisor's Tourism page for Alda <1>
- Phillips
(6 miles [9.7 km] to the east)- Jump to our Gazetteer entry for Phillips
- Phillips is located in Hamilton County
- Jump to TripAdvisor's Tourism page for Phillips <1>
- Doniphan
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doniphan
- Doniphan is located in Hall County
- Jump to TripAdvisor's Tourism page for Doniphan <1>
- Chapman
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Chapman
- Chapman is located in Merrick County
- Jump to TripAdvisor's Tourism page for Chapman <1>
- Giltner
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for Giltner have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Giltner
- Giltner is located in Hamilton County
- Jump to TripAdvisor's Tourism page for Giltner <1>
- Wood River
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Wood River
- Wood River is located in Hall County
- Jump to TripAdvisor's Tourism page for Wood River <1>
- Cairo
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Cairo
- Cairo is located in Hall County
- Jump to TripAdvisor's Tourism page for Cairo <1>
- Trumbull
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Trumbull have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trumbull
- Trumbull is located in Clay County
- Jump to TripAdvisor's Tourism page for Trumbull <1>
- Aurora
(18 miles [29 km] to the east)- Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aurora
- Aurora is located in Hamilton County
- Jump to TripAdvisor's Tourism page for Aurora <1>
- Dannebrog
(18 miles [29 km] to the northwest)- Note: The GPS coordinates that we are using for Dannebrog have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dannebrog
- Dannebrog is located in Howard County
- Jump to TripAdvisor's Tourism page for Dannebrog <1>
- Marquette
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Marquette
- Marquette is located in Hamilton County
- Jump to TripAdvisor's Tourism page for Marquette <1>
- Continue List (60 more) ...
- Prosser
(19 miles [30.6 km] to the southwest) - Hastings
(21 miles [33.8 km] to the south)- Jump to our Gazetteer entry for Hastings
- Hastings is located in Adams County
- Jump to TripAdvisor's Tourism page for Hastings <1>
- Shelton
(21 miles [33.8 km] to the southwest)- Note: The GPS coordinates that we are using for Shelton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelton
- Shelton is located in Buffalo County
- Jump to TripAdvisor's Tourism page for Shelton <1>
- Prosser
Hall County ...
Parkview is located in Hall County<3>.
For more information, please visit our Census Page for Hall County.
Miscellaneous Information for Parkview ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Hall County or the community of Parkview:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 31 (Nebraska)
- County Code: 079 (Hall County)
- Place Code: 38435 (Parkview)
- State & County Code: 31/079 (Nebraska / Hall County)
- State & Place Code: 31/38435 (Nebraska / Parkview)
- Misc. Census Codes ...
- Parkview is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Parkview.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Parkview. If you can help, please contact us through our Feedback Page.
The official website for Hall County: www.hcgi.org/
The official website for State of Nebraska: www.nebraska.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | If you're interested in how the shape of Nebraska's counties, including Hall, have changed over time, we recommend the Atlas of Historical County Boundaries. |